TOOLS FOR SALE

Papawswrench is regularly updating the tool list as tools are bought and sold . All these tools are for sale unless marked SOLD or ON HOLD

Pages - 1 - 2 - 3 - 4 - 5

#ew1034 A fair condition Mossberg box end wrench in sizes 25/32 and 7/8 , marked No.265 with an M in a diamond .Dark patina and slight rust pitting .                                                  $5.00 + S&H

#ew1035  Here is a rusty old Mossberg box end wrench marked No.262 , in sizes 1 1/16 and 1 " .Has the M in a diamond logo on it .

$4.00 + S&H

#mw1031 Good condition H. D. Smith pefect handle adjustable 6 1/2" knife handle screw wrench . has some rust pitting and some dings on it , but in fair condition. Looks like the handle wood has been replaced and the rivet is made from a screw and nut , ground off to fit .

$ 13.95 + S&H

#mw1030 Good condition Girard Railroad Rough , all steel adjustable 7 3/4" long . This wrench has done a lot of work in it's life , and shows it well .This was introduced in 1915 as the "Girard Special" , made for railroad work. The head , jaw , and shank are forged in one piece and case hardened .

$ 13.95 + S&H  SOLD !!

#aw1012 Excellent condition W&B polished alligator wrench . Marked #2 ,it is 6 3/4 " long with 1 1/4" and 1 ' jaws with 99.9% teeth , some very , very light hammer marks on it .Logo is W&B in a diamond , and it has some surface scratches on it .

$ 12.00 + S&H  

#aw1013 Good condition K&B co. Saxon alligator with thread chasers in the middle .Length is 8 1/4" .   Jaws are 1 1/4" and 1" , teeth are 90% good , one almost missing , and chasers are the standard 5/18x18tpi , 1/2x13tpi , and 3/8x16tpi . Made by The K&B Co. of New Haven , Conn. Nice dark patina .

$ 9.95 + S&H

#aw1014 Excellent condition Hawkeye Wrench Co.Crocodile wrench with screwdriver tip . Jaws are 1" and 3/4" , thread chasers are 5/6x18tpi , 1/2x13tpi , and 3/8x16tpi . The screwdriver tip is perfect and the teeth are 99.5% good . This wrench is 8 1/2" long and was made by The Hawkeye Wrench Co. of Marshalltown , Iowa .

$ 9.95 + S&H

#aw1015  Nice condition terrier #10 alligator wrench by K&B , New haven , Conn.. Drop Forged wrench 5 1/2" long with jaw opening of 1 1/8" , 1 1/2" deep , teeth a bit worn from use . Cutouts in handle are for the old square nuts , approximately 3/4 , 1/2 , 3/8 , and 1/4 inch . This old wrench has some light rust pitting .

$7.95 + S&H

#aw1016 Good condition small alligator like the "always ready " type . It is unmarked except for what I believe are initials , they are EDJ . The wrench looks like it was galvanized at one time and does have rust pitting all over it . 5" long with 7/8" jaw 1 1/4 " deep and 5/8" jaw 7/8" deep .

$ 5.95 + S&H

#sw1001 Good condition Walworth Stillson No. 14 . Tthis is the most common pipe wrench in the world and is made by the Walworth Co. of Boston , Mass. from the patent of Daniel Stillson , of 1869 .Later patents owned by Walworth were for improvements on the original wrench .This example is in great working condition  , marked Walworth , Genuine Stillson #14 ( 14" long )  . The teeth are good with one small chip on each jaw , the action is good , and it has the patina of years of use .

$ 15.95 + S&H

Pages - 1 - 2 - 3 - 4 - 5