wrench

Bull Terrier type

An unmarked "Bull Terrier" type in the Whitman and Barnes style A stamped steel wrench 5 1/2" long.No broken teeth, and a nice patina from age.
Item# aw1025 - $ 8.00 + S&H.
SOLD

wrench wrench wrench wrench
wrench

Bonney Vixen Alligator

Excellent condition Bonney Vixen made in Allentown, Pa. Teeth are worn from use, and the thread chasers are in great shape.The Bonney logo- a shield with chevrons and a "B" in it are clear.This wrench has a clear coat on it to prevent rust. 8" long.
Item# aw1026 - $ 22.00 + S&H.

wrench wrench wrench wrench wrench wrench wrench
wrench

Swastika marked Alligator

This old alligator wrench is probably made by Buffum Tool of Louisiana, Missouri, the only maker to use the swatika. Buffum predates Nazi Germany and there is no connection to Hitler. The wrench is a bit rust pitted and has a lot of wear on the teeth. Marked only with the swastika and "drop forged", and very faint size markings on the dies. 8" long.
Item# aw1027 - $ 30.00 + S&H.

wrench wrench wrench wrench
wrench

Hawkeye Alligator wrench

This Hawkeye alligator wrench by The Hawkeye wrench Co. of Marshalltown, Iowa is in very good condition with slight wear on the teeth and clean thread chasers. The wrench has a nice patina and some signs of rust pitting8 1/2" long with almost no hammer marks on it. Patent# 720554, 8" long.
Item# aw1028 - $ 16.00 + S&H.

wrench wrench wrench wrench wrench wrench
wrench

S and T alligator wrench

This is a stamped steel alligator wrench by The S and T Wrench Co. with the standard thread chasers on it. Wrench is pitted and has significant wear on the teeth. 8" long.
Item# aw1029 - $ 10.00 + S&H.

wrench wrench wrench
wrench

Ever Ready alligator wrench

This stamped steel alligator wrench like the S and T is in great condition with the thread chasers and teeth in very good condition. No maker name on it, just Ever Ready and Made In USA. All markings are clear. 8" long.
Item# aw1030 - $ 12.00 + S&H.

wrench wrench wrench wrench wrench
wrench

Atlas Tool Co. alligator wrench

This stamped steel alligator by the Atlas Tool Co.of New York is in excellent condition except for minor rust pitting. All teeth and dies are intact and markings are clear. Marked only with "ATLAS TOOL CO." and "NEW YORK". 8" long.
Item# aw1031 - $ 12.00 + S&H.

wrench wrench wrench
wrench

S and Co. alligator wrench

"Always Ready" type alligator made by The S and Co., marked #2. This wrench is in good condition with only one tooth slightly damaged and minor hammer marks. It has a nice patina with minor rust damage. 6 7/8" long.
Item# aw1032 - $ 9.00 + S&H.

wrench wrench wrench wrench wrench
wrench

Whitman and Barnes type #1 alligator

An unmarked alligator like the Whitman and Barnes wrench. This wrench is clean and without major flaws. 5 1/2" long.
Item# aw1033 - $ 8.00 + S&H.

wrench wrench
wrench

Steel Alligator Wrench

This small alligator wrench is unmarked and is made of an odd steel that almost looks like Damascus steel. It has all the teeth, a hanger hole, and is 5" long.
Item# aw1034 - $ 15.00 + S&H.
SOLD

wrench wrench wrench wrench
wrench

Mossberg style alligator wrench

This wrench is similar to Mossberg alligator wrenches found in some old tool kits, but is not marked, except with initial "B. P." Some wear on the teeth on this 5 1/2" wrench. The wrench is thicker than most stamped steel alligators.
Item# aw1035 - $ 10.00 + S&H.
SOLD

wrench wrench wrench
wrench

6” Hoe Wrench Co. self-adjusting alligator wrench

This excellent example of the Hoe wrench is in excellent condition with all the teeth intact and the spring mechanism is perfect. Has a nice wooden handle. 6" long.
Item# aw1036 - $ 30.00 + S&H.
SOLD

wrench wrench wrench wrench wrench wrench
wrench

Error casting #2 Bulldog

Top condition #2 Bulldog wrench by Whitman and Barnes, with the 2 cast upside down! 9" long, with a chip off the front of the toothed jaw, but good teeth and nice patina. Marked with W &B in a diamond.
Item# aw1037 - $ 40.00 + S&H.

wrench wrench wrench wrench wrench
wrench

Whitman and Barnes #2 Bulldog

Top condition #2 Bulldog wrench by Whitman and Barnes. 9" long, with good teeth and nice patina. Marked with the W in a diamond.
Item# aw1038 - $ 20.00 + S&H.

wrench wrench wrench wrench
wrench

J H Williams #2 Bulldog Wrench

A nice J. H. Williams 9" #2 Bulldog Wrench with all the teeth and no hammer marks. A little rusty and has some green paint on the handle.Has the Williams diamond on it.
Item# aw1039 - $ 15.00 + S&H.

wrench wrench wrench wrench
wrench

Whitman and Barnes #1 type

An unmarked alligator like the Whitman and Barnes wrench. This wrench is rusted and pitted. 5 1/2" long.
Item# aw1040 - $ 5.00 + S&H.

wrench wrench wrench
wrench

Bull Terrier type alligator wrench

An unmarked example of the classic Bull Terrier type alligator wrench, 5 1/2" long. This stamped steel wrench is in excellent condition with all its teeth intact and no dings on it at all. No maker's mark.
Item# aw1041 - $ 6.00 + S&H.

wrench wrench
wrench

Bull terrier type alligator wrench

An unmarked example of the classic Bull Terrier type alligator wrench, 5 1/2" long. This stamped steel wrench is in goodt condition with all its teeth intact and no dings on it at all. It has some rust pitting on it. No maker's mark.
Item# aw1042 - $ 5.00 + S&H.

wrench wrench
wrench

#1 Alligator wrench

An unmarked alligator like the Whitman and Barnes #1 wrench. This wrench is rusty and dull, but without major flaws. 5 1/2" long.
Item# aw1043 - $ 10.00 + S&H.

wrench wrench
wrench

Mossberg 715D Alligator combination wrench

This 5 3/4" wrench is from one of Mossberg's well known tool sets 1910 to 1930. Alligator jaw is 3/4" at the widest, and the open end is 1/2". Open end has some distortion, but the alligator end is near perfect. Marked "715D" with two "Diamond M" markings.
Item# aw1044 - $ 12.00 + S&H.

wrench wrench wrench
wrench

Roebling #2 Alligator Wrench

This J.A. Roebling ( of Brooklyn Bridge fame) #2 Bulldog style is the same as the Whitman and Barnes Bulldog wrench, except the teeth are angled for a better grip. The teeth on this rusty and slightly pitted wrench are intact, and the wrench has not been hammered. Made in Trenton, New Jersey.
Item# aw1045 - $ 16.00 + S&H.

wrench wrench wrench wrench wrench
wrench

Roebling Twin Alligator Wrench

This J. A. roebling (of Brooklyn Bridge fame)is 10" long, has a slight rust on it, and some deterioration of the angled teeth from use or rust. It is marked "Tin Alligator Wrench on one side and MF"D by Roebling Trnton N.J. on the other. Also marked 1 and 2 on the ends. There is also the Roebling JAR in a circle, circled by REG. US PAT. OFF.
Item# aw1046 - $ 18.00 + S&H.

wrench wrench wrench wrench
return to top
Noel C. Hankamer   nhankamer@papawswrench.com

Valid XHTML 1.0 Transitional

Valid CSS!