Tool Talk
Wrench Forum => Wrench Forum => Topic started by: coolford on May 13, 2019, 06:15:56 PM
-
Picked these up at auction on Saturday, raining and cold not many bidders paid $37.50 for both lots. The socket set is 40 pieces and all are -v- except one short socket which is proto. Note the short extensions are under the long extension. The deep socket set is also -v- and runs from 1/2" through 1 1/8" and also includes a 25/32. The last socket was in the lot and is 1 1/4" and is a cornwell. As you can see, the condition is fine---nothing has been cleaned.
-
Hello, Coolford. Nice score on both sets!!!! Regards, Lou
-
Ya looks like you made out pretty good. Wonder what sort of fastener has a 25/32 head on it?
-
That's a good question plyerman, I'f often wonder that myself.
-
Someone knew that a few 3/4 nuts would get dinged up and so they were prepared.
-
..... Wonder what sort of fastener has a 25/32 head on it?....
WRENCH SIZES
31/32" is the old U.S.S. standard for 9/16" nut.
25/32" is the old U.S.S. standard for 7/16" nut.
21/32” is for Ford rod bolts.
19/32" is the old U.S.S. standard for 5/16" nut.
13/32” is the old U.S.S. standard for 3/16” bolt/nut
11/32" is the old standard for #8 hex screw. Still common in electrical work.
-
I believe some of those 32nds size wrenches were used on bicycle nuts and bolts when I was rebuilding a lot of bikes back in the 70's and 80's.