Author Topic: Sears/Craftsman Tap and Die Sets  (Read 16411 times)

0 Members and 3 Guests are viewing this topic.

Offline Jim C.

  • Hero Member
  • *****
  • Posts: 1065
Sears/Craftsman Tap and Die Sets
« on: February 24, 2019, 07:36:07 PM »
A few weeks back, I bought the set of Sears Craftsman SAE taps and dies depicted below.  The tools themselves and the plastic case are in great condition for their age.  Based on the tools included, I'd estimate the set is probably from right around 1972.  Some of the tools have a pointed letter "A" in the word CR"A"FTSM"A"N and some have a flat top letter "A."  I wish I could say that I got a smoking hot deal on the set, but I didn't.  It was an eBay purchase where the seller accepted my best offer.  I paid a fair price for it.  Here's where things get interesting.  The set was described as "Complete."  Well it was complete, and from what I could see in the auction photos, everything looked good.  So, I made an offer, it was accepted, and a few days later the set arrived in the mail.  When I unpacked it, I was very pleased with what I initially saw.  I looked at every tool under a magnifying glass to make sure everything was vintage correct and undamaged.  Perfect......until I looked at the very last, and smallest tap in the set, the 4-40.  While EVERY other tool was stamped "Craftsman" and made in the USA, etc., the dead last tool I looked at, the 4-40 tap, was unmarked but for its size, which read, "4-40" and its origins, which read, "JAPAN."  Needless to say I was bummed.  Well, I had a few options.  I could contact the seller and complain.  The problem was that the set was described as "complete," which it was, and the seller never said all the tools were original to the set or all marked as Craftsman......and I didn't ask prior to making an offer.  I was sort of stuck with it.  My next option was to scour eBay looking for another vintage correct Craftsman 4-40 tap.  So, I searched eBay every day for about a week and realized it was going to be a tough tool to find.  My third, and best option, was to ask for help.  I thought about who I knew that might have the tap.  While a few guys came to mind, I had a feeling this one guy would likely have it.  The guy who collects everything.....coolford.  I reached out to him, he confirmed that he had exactly what I was looking for, and a few days later the tap was in my mailbox.  He gifted me the tap and truly helped me complete the set with the right tool.  I wanted to take a minute to thank him!  There’s a great tool enthusiast community here on this website.  It may not be the biggest, but it is absolutely the best.  Many thanks coolford!!

Jim C.     
« Last Edit: October 04, 2022, 05:36:10 AM by Jim C. »
Our Go-To Type Study Member

Offline p_toad

  • Hero Member
  • *****
  • Posts: 946
Re: Sears/Craftsman SAE Tap and Die Set
« Reply #1 on: February 25, 2019, 11:01:57 PM »
Too cool, Coolford.   Thank you both for sharing that!   :smiley:

Offline coolford

  • Hero Member
  • *****
  • Posts: 865
  • Old as dirt
Re: Sears/Craftsman SAE Tap and Die Set
« Reply #2 on: February 26, 2019, 08:11:04 AM »
Jim---looks even better knowing everything is correct.  Check the Owatonna socket wrenches in wrench forum.

Offline Jim C.

  • Hero Member
  • *****
  • Posts: 1065
Re: Sears/Craftsman SAE Tap and Die Set
« Reply #3 on: February 26, 2019, 09:16:31 AM »
coolford,

YOU ARE THE MAN!!!!!  Thank you again!

Jim C.
Our Go-To Type Study Member

Offline Notlobster

  • Full Member
  • ***
  • Posts: 21
Re: Sears/Craftsman SAE Tap and Die Set
« Reply #4 on: March 02, 2019, 05:33:27 PM »
Nicely done, coolford.

One of my prized possessions is that exact tap and die set, purchased new by my father ~ 50 years ago.

The Kromedge taps and dies are excellent! - I now have 3 sets.

« Last Edit: March 02, 2019, 05:36:42 PM by Notlobster »

Offline Jim C.

  • Hero Member
  • *****
  • Posts: 1065
Re: Sears/Craftsman SAE Tap and Die Set
« Reply #5 on: March 02, 2019, 06:23:13 PM »
Hi Notlobster,

How about a few pictures of your Craftsman Kromedge tap and die sets?

Jim C.
Our Go-To Type Study Member

Online lptools

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3065
Re: Sears/Craftsman SAE Tap and Die Set
« Reply #6 on: March 03, 2019, 11:20:29 AM »
Hello, Coolford . That was very gracious of you to help Jim complete the set , that would have been a long search for a tap that small, AND with the Craftsman stamp!!!!Regards, Lou
Member of PHARTS-  Perfect Handle Admiration, Restoration and Torturing Society

Online lptools

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3065
Sears Craftsman Kromedge Tap & Die Set
« Reply #7 on: March 03, 2019, 11:31:51 AM »
Hello, Here is a Sears Craftsman 9 5200 SAE Tap & Hexagon Die Set that I have had for a while. Never been used, complete, I left the former owner's hand printed chart inside the lid. Regards, Lou
Member of PHARTS-  Perfect Handle Admiration, Restoration and Torturing Society

Offline Jim C.

  • Hero Member
  • *****
  • Posts: 1065
Re: Sears/Craftsman SAE Tap and Die Set
« Reply #8 on: March 04, 2019, 07:44:25 AM »
Wow!  That set is mint Lou!
Our Go-To Type Study Member

Online skipskip

  • Contributor
  • Hero Member
  • *****
  • Posts: 1493
  • Glenmont NY USA
Re: Sears/Craftsman SAE Tap and Die Set
« Reply #9 on: March 04, 2019, 11:40:16 AM »
Not Craftsman, but sold by Sears

Tools are marked 'Made in USA', but no brand name


DSCF9976 by Skip Albright, on Flickr

DSCF9978 by Skip Albright, on Flickr

DSCF9979 by Skip Albright, on Flickr
A place for everything and everything on the floor

Offline Jim C.

  • Hero Member
  • *****
  • Posts: 1065
Re: Sears/Craftsman SAE Tap and Die Set
« Reply #10 on: March 04, 2019, 01:38:45 PM »
Hey skipskip,

That’s a very nice old set!  It looks to be complete too.  Nice find.  Any story behind it?

Jim C.

Our Go-To Type Study Member

Online lptools

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3065
Re: Sears/Craftsman SAE Tap and Die Set
« Reply #11 on: March 04, 2019, 03:57:25 PM »
Nice!!!!!
Member of PHARTS-  Perfect Handle Admiration, Restoration and Torturing Society

Offline d42jeep

  • Hero Member
  • *****
  • Posts: 432
Re: Sears/Craftsman SAE Tap and Die Set
« Reply #12 on: March 04, 2019, 04:27:52 PM »
Those look kind of familiar. Here are two that are results of trades.
-Don
Member of PHARTS-  Perfect Handle Admiration, Restoration and Torturing Society
CONTRIBUTOR

Offline Jim C.

  • Hero Member
  • *****
  • Posts: 1065
Re: Sears/Craftsman SAE Tap and Die Set
« Reply #13 on: March 04, 2019, 05:04:41 PM »
I’d say they look very familiar!
Our Go-To Type Study Member

Online lptools

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3065
Re: Sears/Craftsman SAE Tap and Die Set
« Reply #14 on: March 04, 2019, 06:18:13 PM »
Hello, Jim. Thanks!!! It is most likely unused by me due to the fact that I forgot where it was!!! Regards, Lou
Member of PHARTS-  Perfect Handle Admiration, Restoration and Torturing Society