Author Topic: S K 40970 1/4" Ratchet  (Read 637 times)

0 Members and 1 Guest are viewing this topic.

Offline Papaw

  • Owner/Administrator
  • Administrator
  • Hero Member
  • *****
  • Posts: 10876
  • Alvin, Texas
    • Papawswrench
S K 40970 1/4" Ratchet
« on: August 20, 2019, 10:54:28 AM »
I want someone to have this little SK ratchet for parts or repair. It is currently held together with safety wire ! I tried other clips, but couldn't get it to go together. Not real pretty, but if you need this or parts, it will do.
I will ship USPS First Class in the US for $6  , shipping included. Just tired of messing with it. Paypal is preferred, but other methods of payment are OK.
First come first served!
« Last Edit: August 20, 2019, 10:56:12 AM by Papaw »
Member of PHARTS - Perfect Handle Admiration, Restoration and Torturing Society
 
 Flickr page- https://www.flickr.com/photos/nhankamer/

Offline Papaw

  • Owner/Administrator
  • Administrator
  • Hero Member
  • *****
  • Posts: 10876
  • Alvin, Texas
    • Papawswrench
Re: S K 40970 1/4" Ratchet
« Reply #1 on: August 23, 2019, 02:53:03 PM »
Gone to Bonneyman .
Member of PHARTS - Perfect Handle Admiration, Restoration and Torturing Society
 
 Flickr page- https://www.flickr.com/photos/nhankamer/

Offline cody6268

  • Sr. Member
  • ****
  • Posts: 45
Re: S K 40970 1/4" Ratchet
« Reply #2 on: August 28, 2019, 02:15:42 PM »
Out of curiosity--what was your problem? I put the rebuild kit in an old one Granddad gave me, and a ton of trouble putting the retaining ring in. Had to have a friend of mine's help, and even then--something seems not in right; though it works just fine.

Offline Papaw

  • Owner/Administrator
  • Administrator
  • Hero Member
  • *****
  • Posts: 10876
  • Alvin, Texas
    • Papawswrench
Re: S K 40970 1/4" Ratchet
« Reply #3 on: August 28, 2019, 04:02:25 PM »
I had the most trouble getting the circlip to go in. Sometimes the innards didn't want to go in right, but usually with perseverance I would get it , but then the circlips I tried would not go in.

I bet Bonneyman gets it first try !
Member of PHARTS - Perfect Handle Admiration, Restoration and Torturing Society
 
 Flickr page- https://www.flickr.com/photos/nhankamer/

Offline EVILDR235

  • Hero Member
  • *****
  • Posts: 1293
Re: S K 40970 1/4" Ratchet
« Reply #4 on: November 25, 2019, 10:40:58 PM »
I have put rebuild kits in a few. Wear safety glasses and turn up the radio so other folks don't hear all the cussing.

?