Author Topic: adjustable jaw, vise/anvil  (Read 1851 times)

0 Members and 1 Guest are viewing this topic.

Offline john k

  • Contributor
  • Hero Member
  • ***
  • Posts: 2649
adjustable jaw, vise/anvil
« on: May 08, 2012, 06:52:19 PM »
Here is one of those universal tools, it will do a lot of things, just none of them real well.  Decent light weight vise, with only two inches of screw thread.  To make it bigger, pull the pin and slide the whole adjustable jaw out.  I usually see them offered as a lightweight  anvil minus the jaw.  Only mark is Pat. 1889.   From the marks on the anvil face, it did see some semi-serious work at one time.    Weighs over 50lbs, the inside of the anvil casting is all hollow from below.   Sitting there next to a broken vise I picked up for free. 
Member of PHARTS - Perfect Handle Admiration, Restoration and Torturing Society

Offline 64longstep/Brian

  • Contributor
  • Hero Member
  • *****
  • Posts: 484
  • Phoenix Arizona
Re: adjustable jaw, vise/anvil
« Reply #1 on: June 03, 2012, 11:50:45 PM »
I like the anvil vices, I will have at least one some day...
If all else fails use a bigger hammer…
Member of PHARTS - Perfect Handle Admiration, Restoration and Torturing Society