Author Topic: Plomb Pebble  (Read 7808 times)

0 Members and 1 Guest are viewing this topic.

Offline FrankLee

  • Sr. Member
  • ****
  • Posts: 192
Plomb Pebble
« on: May 03, 2011, 06:04:28 AM »
Looking for Plomb pebbles.



Double Box End Wrenches - Pebble Shank:
1120 - 5/16 x 3/8 - MFD. U.S.A. - Skip - 11/27/2010
1122 - 3/8 x 7/16 - MFD. U.S.A. - eBay - 01/11/2011
1125 - 7/16 x 1/2 - MFD. U.S.A. - Dave - 12/03/2010
1126 - 1/2 x 9/16 - MFD. U.S.A. - eBay - 01/16/2011
1126 - 1/2 x 9/16 - MFD. U.S.A. - Tom - 02/05/2011
1126 - 1/2 x 9/16 - MFD. U.S.A. - VD flea mkt - 06/01/2011
1127 - 1/2 x 19/32 - MFD. U.S.A. - Tom - 03/28/2011
1130 - 9/16 x 5/8 - MFD. U.S.A.
1131 - 5/8 x 3/4 - MFD. U.S.A.
1134 - 5/8 x 11/16 - Made in U.S.A. - Rick - 12/31/2010
1135 - 11/16 x 3/4 - MFD. U.S.A.
1136 - 11/16 x 7/8 - MFD. U.S.A. - eBay - 2/5/2011
1137 - 11/16 x 25/32 - Made in U.S.A - Cliff - 1/31/2011
1139 - 3/4 x 7/8 - MADE IN U.S.A. - David - 02/09/2011
1140 - 13/16 x 7/8 - MFD. U.S.A.
1141 - 7/8 x 1 1/16 - MADE IN U.S.A. - eBay - 02/05/2011
1141 - 7/8 x 1 1/16 - Made in U.S.A. - Rick - 12/31/2010
1145 - 15/16 x 1 - MFD. U.S.A.
1147 - 15/16 x 1 1/16 - MFD. U.S.A. - Steve - 01/21/2011
1150 - 1 1/16 x 1 1/8 - MFD. U.S.A.

1151 - 1 1/16 x 1 1/4
1155 - 1 1/4 x 1 5/16
1160 - 1 1/4 x 1 3/8
1161 - 1 1/4 x 1 7/16
1162 - 1 7/16 x 1 1/2
1163 - 1 7/16 x 1 5/8
1164 - 1 5/8 x 1 11/16

Double Box End Wrenches - Smooth Shank:

1130 - 5/8 x 9/16 - Los Angeles 7 A - flea
1135 - 11/16 x 3/4 - flea - 5/22/2011
1161 - 1 1/4 x 1 7/16 - Made in U.S.A. - eBay - 01/05/2011
8162 - 5/8 x 11/16 - U.S.A. - VD flea mkt - 06/01/2011


Combination Wrenches - Pebble Shank:
1210 - 5/16 - MFD. U.S.A. - Rod trade - 02/14/2011
1212 - 3/8
1214 - 7/16
1216 - 1/2 - MFD. in U.S.A. - Matthew - 05/27/2011
1218 - 9/16

1220 - 5/8 - MFD. U.S.A. - Rod trade - 02/14/2011
1220 - 5/8 - MFD. U.S.A. - Steve - 01/21/2011
1220 - 5/8 - MFD. U.S.A.
1222 - 11/16 - MFD. U.S.A. - Rick - 12/31/2010
1224 - 3/4 - MFD. U.S.A. - Rod trade - 02/14/2011
1226 - 13/16 - MFD. U.S.A. - Rod trade - 02/14/2011


1228 - 7/8 - MFD. in U.S.A. - Matthew - 05/27/2011


1230 - 15/16 - MFD. U.S.A. - Steve - 01/21/2011
1232 - 1 - MADE in U.S.A. - eBay - 02/24/2011
1234 - 1 1/16 - Made in U.S.A. - Rick - 12/31/2010

1236 - 1 1/8 - Made in U.S.A. - Matthew - 05/27/2011
1240 - 1 1/4
1242 - 1 5/16
1244 - 1 3/8
1246 - 1 7/16

Combination Wrenches - Smooth Shank:
1220 - 5/8 - Made in U.S.A. - eBay - 01/11/2011
1222 - 11/16 - MFD. U.S.A. - Steve - 01/21/2011
1224 - 3/4 - Made in U.S.A. - Steve - 01/21/2011


Double Open End Wrenches - Pebble Shank:
3018 - 1/4 x 5/16
3020 - 5/16 x 3/8
3021 - 3/8 x 7/16
3025 - 7/16 x 1/2
3026 - 1/2 x 9/16 - 5/22/2011
3027 - 1/2 x 19/32
3030 - 9/16 x 5/8
3031 - 5/8 x 3/4 - ebay - 05/03/2011
3032 - 19/32 x 25/32
3034 - 5/8 x 11/16
3035 - 11/16 x 3/4
3036 - 11/16 x 7/8
3037 - 11/16 x 25/32
3039 - 3/4 x 7/8
3040 - 13/16 x 7/8 - MFD. U.S.A. - flea
3041 - 7/8 x 1 1/16
3045 - 15/16 x 1
3047 - 15/16 x 1 1/16
3050 - 1 1/16 x 1 1/8
3051 - 1 1/16 x 1 1/4
3055 - 1 1/14 x 1 5/16
3060 - 1 3/8 x 1 7/16
3061 - 1 1/4 x 1 7/16
3062 - 1 3/8 x 1 1/2
3065 - 1 7/16 x 1 5/8
3070 - 1 1/2 x 1 5/8


Double Open End - Smooth Shank
3039 - 3/4 x 7/8 - Made in USA - garage sale

3328 - 7/16 Electrical wrench (Proto) - MFD. U.S.A.
3332 - 1/2 Electrical wrench - Made in U.S.A. - eBay - 01/11/2011


Socket Tools:
5222 - socket, 3/8 dr, 12 pt, 11/16" - Made in U.S.A. - garage sale
5265 - 3/8 dr - breaker bar - Made in U.S.A. - Tony
7422H - socket, 1/2 dr, 6 pt, 11/16" - Made in U.S.A. - garage sale store
« Last Edit: July 28, 2011, 09:03:08 AM by FrankLee »

Offline FrankLee

  • Sr. Member
  • ****
  • Posts: 192
Re: Plomb Pebble
« Reply #1 on: May 13, 2011, 06:59:57 AM »
Still looking for these.

Offline stanley62

  • Hero Member
  • *****
  • Posts: 571
Re: Plomb Pebble
« Reply #2 on: May 18, 2011, 02:53:40 PM »
Frank,

  I printed out your list and will compare to mine.  I'll let you know if I have any doubles.

  Jim
Always looking for Stanley planes and parts, Mossberg and Plomb wrenches.

Offline dimwittedmoose51

  • Hero Member
  • *****
  • Posts: 1387
  • Contributor
Re: Plomb Pebble
« Reply #3 on: May 18, 2011, 05:02:10 PM »
Yeah, it'll be a while before I get any doubles myself.  Just scored a Plomb 18" pipe wrench last week though.  More on that later.....

DM&FS

Champion Pawn/Flea Plunderer
Old Tools and Music.....My drugs of choice

Offline FrankLee

  • Sr. Member
  • ****
  • Posts: 192
Re: Plomb Pebble
« Reply #4 on: May 19, 2011, 06:13:58 AM »
Thanks. I have quite a few doubles, triples, and quads myself. I should post them up for trade.

Offline bonneyman

  • Hero Member
  • *****
  • Posts: 1742
Re: Plomb Pebble
« Reply #5 on: May 21, 2011, 11:42:11 AM »
Darn - those are nice. I like the shallow offset design. What is it, like 10 degrees?
Not flat, but not deep offset, either. Sometimes you need one of those shallow offset box ends.
Ratchet Guru

Offline FrankLee

  • Sr. Member
  • ****
  • Posts: 192
Re: Plomb Pebble
« Reply #6 on: May 21, 2011, 02:30:46 PM »
Plombs have a 15 degree offset.

I just picked-up another 1222 pebble and an 1135 smooth today for $1.00 each.
« Last Edit: May 21, 2011, 02:34:37 PM by FrankLee »

Offline FrankLee

  • Sr. Member
  • ****
  • Posts: 192
Re: Plomb Pebble
« Reply #7 on: May 21, 2011, 02:47:19 PM »
I have the following duplicate/extra Plombs to trade for my missing pebble wrenches:

1126 pebble
1130 pebble
1135 smooth
1141 pebble
1220 pebble x2
1220 smooth
1222 smooth
1224 smooth
3039 smooth
5222 - 3/8 dr, 11/16 socket
5265 pebble - 3/8 breaker
« Last Edit: July 03, 2011, 08:00:10 AM by FrankLee »

Offline sumner52000

  • Sr. Member
  • ****
  • Posts: 191
Re: Plomb Pebble
« Reply #8 on: May 22, 2011, 07:13:17 PM »
I know I have these.  I'll get pics tomorrow and see if i can find anymore.

Combination Wrenches - Pebble Shank:
1216 - 1/2
1228 - 7/8
1236 - 1 1/8

Offline FrankLee

  • Sr. Member
  • ****
  • Posts: 192
Re: Plomb Pebble
« Reply #9 on: May 23, 2011, 06:08:31 AM »
I know I have these.  I'll get pics tomorrow and see if i can find anymore.

Combination Wrenches - Pebble Shank:
1216 - 1/2
1228 - 7/8
1236 - 1 1/8


Looking forward to your pics. Thanks.

Offline sumner52000

  • Sr. Member
  • ****
  • Posts: 191
Re: Plomb Pebble
« Reply #10 on: May 23, 2011, 10:00:05 AM »
Here are a few pics.  If you need more let me know.  None are perfect.  I got them all at yard sales or the flea market.

1236 has 2 grind marks
1228 has 19 stamped on the open end
1216 has 2 grind marks (not sure if this has the pebble finish)

Offline sumner52000

  • Sr. Member
  • ****
  • Posts: 191
Re: Plomb Pebble
« Reply #11 on: May 23, 2011, 10:06:11 AM »
Here is the rest of the plomb that i have.  I didn't see any of these on your wanted list but here they are just in case.

1161 DBE 1 1/4 & 1 7/16 ( 2 grind marks)
3050 DOE 1 1/16 & 1 1/8 (owners mark on back)
1126 DBE  9/16 & 1/2

5468 1/2 Drive breaker bar 18"
5262 3/8 exension 12" Large X grind mark
5218 9/16 socket 3/8 drive 12pt short

Offline FrankLee

  • Sr. Member
  • ****
  • Posts: 192
Re: Plomb Pebble
« Reply #12 on: May 23, 2011, 01:15:46 PM »
pm sent

Offline kxxr

  • Hero Member
  • *****
  • Posts: 1157
Re: Plomb Pebble
« Reply #13 on: May 26, 2011, 08:17:37 PM »
Proto 5849 with a couple of extensions. I didn't check the extensions for markings, but they are 10" and 18" I'm guessing? The sockets are all Taiwan. This beauty needs a new home. The pawnshop has $400 on it. I'm tempted to ask if they'll break up the 'set'. I thought you might enjoy having a look.

Offline Papaw

  • Owner/Administrator
  • Administrator
  • Hero Member
  • *****
  • Posts: 11221
  • Alvin, Texas
    • Papawswrench
Re: Plomb Pebble
« Reply #14 on: May 26, 2011, 09:58:24 PM »
$400 ???????
Member of PHARTS - Perfect Handle Admiration, Restoration and Torturing Society
 
 Flickr page- https://www.flickr.com/photos/nhankamer/