Tool Talk

Wrench Forum => Wrench Forum => Topic started by: cgw2also on July 08, 2017, 06:03:36 PM

Title: MAKER OF OLD 8'' PLIERS
Post by: cgw2also on July 08, 2017, 06:03:36 PM

 Got these recently at my favorite flea market rusty and cruddy as all get out. No makers name found only a number just  below the slip joint  H-1108. May be only a partial but with all the rust pitting nothing else is readable. Did some research on AA but came up zero. Can anyone out there help from the number and the grip pattern on the handles? There are 9 or 10 horizontal lines at each end of grip pattern. TIA for any info.

Newbie Charlie still learning

Title: Re: MAKER OF OLD 8'' PLIERS
Post by: kwoswalt99 on July 08, 2017, 06:08:17 PM

They look like Diamond to me.

Title: Re: MAKER OF OLD 8'' PLIERS
Post by: bill300d on July 08, 2017, 07:53:42 PM

JP Danielson made for ?.

Title: Re: MAKER OF OLD 8'' PLIERS
Post by: cgw2also on July 08, 2017, 08:48:20 PM

 Thanks bill 300d, I agree that it was Danielson. Went to AA again and they match grip patterns.

Newbie Charlie