Tool Talk
Wrench Forum => Wrench Forum => Topic started by: t115145 on October 02, 2017, 08:49:25 AM
-
Found a couple of Plombs at the flea market, a Combo 5/16 Pebble 1210, and a 1126 1/2-7/16 DBE.
Now for the odd ball.
It's a 5/16, 1/4 open end with a 1/4 6 point box stamped in the middle, and two copper feeler gauges riveted on the 5/16 end. The feeler gauges are marked "For Magnetoes" and "Sparkplugs". There is a logo on the back that I think is the rounded H-B.
Herbrand? But there is a figure in the middle that's too small to make out. It also could be an A-B (American Bosch?)
Any idea, what magneto this might have been used for.
I know some pic's would help. I'll work on it.
-
Probably Bosch. Lots of them in ignition kits.
-
Can't help, but I used to have a similar wrench for a CZ/Jawa (Czech) motorcycle. Motorcycle tool kits tend to concentrate as much function in a given tool as possible, since there's not a lot of room for a big toolbox on a motorcycle.
-
I would also say american bosch. Especially if this is the logo.
-
http://www.ebay.com/itm/American-Bosch-Magneto-Corp-Wrench-with-Feeler-Gauge-/292272417837?hash=item440ccb2c2d:g:4AoAAOSwSYpZy9OZ (http://www.ebay.com/itm/American-Bosch-Magneto-Corp-Wrench-with-Feeler-Gauge-/292272417837?hash=item440ccb2c2d:g:4AoAAOSwSYpZy9OZ)
(http://i.ebayimg.com/images/g/4AoAAOSwSYpZy9OZ/s-l1600.jpg)
-
Thanks for the pic of the AB logo. That's it! It's stamped in and you need a good magnifying glass to make out the details.
In my opinion, not a bad buy for a quarter,
-
Now you just need to find a vehicle with the appropriate magneto to use it on!
-
Got one, it's called a Cessna.
Thanks all of you for your help.