Tool Talk
Wrench Forum => Wrench Forum => Topic started by: amertrac on November 04, 2011, 03:37:40 PM
-
not 3 1/4, not 3 1/2 but 3inch in like brand new condition must have been a pocket wrenchworks good and tite . directly from its home ground bob w.
-
That is a nice one...
-
Cool! Get it closed all the way and see if it is 2 7/8" like mine. Does it have a registration number on it?
-
no reg, no, and i miked it 3 in, on the nose. now I have to look for a smaller one, thanks noel bob w.
-
no reg, no, and i miked it 3 in, on the nose. now I have to look for a smaller one, thanks noel bob w.
bob ive got a 2-7/8"king dick with reg no and bulldog trademark,also has made in england.
needs a clean but nice,also got 4=1/8"kd with just british made king dick and the number h2418.
yours for a lady godiva,donated to noel.
brian
-
ahh the cockney shows out :))
-
whqt the hack is a lqdy godiva? where do i get one? bob w.
-
I think that is a five pound note.
Convert British Pound to US Dollar
£ 1 = $ 1.6041
£ 1 = $ 1.6041
£ 5 = $ 8.0205
£ 10 = $ 16.0411
£ 50 = $ 80.2053
£ 100 = $ 160.4107
£ 500 = $ 802.0533
£ 1000 = $ 1604.1065
-
noel send me your pp no i will call his bluff bob w .
-
re lady godiva,,you are right Noel that its £5..it ids known as cockney rhyming slang,a code used for a long time in parts of london..
here are a couple of king dicks showing a 3 inch and its smaller mate together..the smaller one is quite rare as it is marked abingdon ,, king dick.and the bulldog.also No 0..not the best example,but nice..the 3 inch is really nice..full chrome,a little jaw damage,with reg no.
-
From across the pond . Mr. Walker sent me these if I would donate to the forum
fantastic king dicks A FOUR INCH AND A THREE INCH AND AN ENGLISH ADJ THAT I HAVE NEVER SEEN BEFORE FITS RIGHT INTO MY COLLECTION thank you Brian bob w.
-
Question- the number on Benjy's 3" wrench is the same as the number on my 2 7?8" wrench. What kind of number is it?
Ro No 765509
-
You guys are despicable!! 3 inches!! and even smaller!!
Of all the nerve!
one 3 1/2 and two, 4"'s are all I ever got.
Except one of mine is a Billings.
That count at all??
yours Scott
-
Like in horsehoes and hand grenades, yes.
-
>Ro No 765509
Registro Official (RO) Number
A different way of specifing a registered design ...somewhat odd for a KD tho, unless it was for export to some spanish speaking country?...
-
Question- the number on Benjy's 3" wrench is the same as the number on my 2 7?8" wrench. What kind of number is it?
Ro No 765509
on that odd wrench that i got from walker is ro no.777629 right under the pat no.
-
You guys are despicable!! 3 inches!! and even smaller!!
Of all the nerve!
yours Scott
You can still brag that yours is bigger.
-
bob i was sure that little king dick measured 2-7/8,has it grown?
the other wrench pat no dates it to 1932/3.
brian