Text only | Text with Images

Tool Talk

What's-It Forum => What's-It Forum => Topic started by: Papaw on January 20, 2019, 01:30:32 PM

Title: Babbit tool or sand casting tool ?
Post by: Papaw on January 20, 2019, 01:30:32 PM
I have this tool that needs ID so I can properly sell it.
Marked N T I   S1982H-1 and has 982-12 on both ends. The ends do thread off, so they must interchange with other ends. 9 1/2 " long , and the "spoon" ends are 3/8" wide.
Title: Re: Babbit tool or sand casting tool ?
Post by: coolford on January 20, 2019, 02:46:00 PM
Does not look like the bearing scrapers in my collection.
Title: Re: Babbit tool or sand casting tool ?
Post by: amecks on January 20, 2019, 03:02:52 PM
Guessing.  Tire lever for motor or bicycle.  Maybe the ends unscrew to fit in a tool kit.
Title: Re: Babbit tool or sand casting tool ?
Post by: Papaw on January 20, 2019, 03:19:48 PM
Not strong enough for tire tools. The ends are shiny on the convex side as if they were used on something hot.
Title: Re: Babbit tool or sand casting tool ?
Post by: lptools on January 20, 2019, 03:22:53 PM
Pottery?
Title: Re: Babbit tool or sand casting tool ?
Post by: oldgoaly on January 20, 2019, 04:57:58 PM
Too new to match any foundry tool I have, does look like clay working but the ends thread on? Well all the clay working tools I have a 1 pc "cheapy"
Title: Re: Babbit tool or sand casting tool ?
Post by: lptools on January 20, 2019, 06:26:05 PM
Hello, Papaw. I was thinking dental? but it would most likely need to be all stainless. There is a huge market for hobby spatulas, could be for wax carving??? Regards, Lou
Title: Re: Babbit tool or sand casting tool ?
Post by: mikeswrenches on January 20, 2019, 07:44:07 PM
Maybe for wax?

Mike
Text only | Text with Images