Tool Talk

Wrench Forum => Wrench Forum => Topic started by: kxxr on November 21, 2011, 02:10:03 PM

Title: Craftsman Professional USA 15/16 stubby
Post by: kxxr on November 21, 2011, 02:10:03 PM
Still hunting for this one. If anyone has an extra (or the SK) they want to sell or trade.
Title: Re: Craftsman Professional USA 15/16 stubby
Post by: Nolatoolguy on November 21, 2011, 03:54:02 PM
What age......i might have one.....i will check later when I go to the garge
Title: Re: Craftsman Professional USA 15/16 stubby
Post by: kxxr on November 21, 2011, 05:24:40 PM
It goes with this set, the part number is 44102 I believe. Made by SK, not sure when. The SK 15/16 would work too and it is number SKT88030.
(http://i301.photobucket.com/albums/nn48/kxxr/tools/craftsman4pc.jpg)
Title: Re: Craftsman Professional USA 15/16 stubby
Post by: Nolatoolguy on November 24, 2011, 11:18:56 AM
Sorry man I looked and its my only 15/16 stubby. Some sizes I have multiples of but not the 15/16 for some odd reason. I will keep my eyes out thoe if I see one for sale.
Title: Re: Craftsman Professional USA 15/16 stubby
Post by: kxxr on November 24, 2011, 01:43:21 PM
ok, thanks. Is the one you have the 44102 that matches my set? Would you consider a trade for a 15/16" sk?
Title: Re: Craftsman Professional USA 15/16 stubby
Post by: Nolatoolguy on November 28, 2011, 12:14:29 AM
No its not. Ime not sure on the model number but its a snap on stubby old school design though. Not like the new ones.
Title: Re: Craftsman Professional USA 15/16 stubby
Post by: kxxr on March 13, 2012, 04:53:57 PM
Bump, still hunting that SK made Craftsman 15/16" stubby.
Quote from: kxxr on November 21, 2011, 05:24:40 PM
It goes with this set, the part number is 44102 I believe. Made by SK, not sure when. The SK 15/16 would work too and it is number SKT88030.
(http://i301.photobucket.com/albums/nn48/kxxr/tools/craftsman4pc.jpg)
Title: Re: Craftsman Professional USA 15/16 stubby
Post by: OilyRascal on May 10, 2012, 05:43:16 PM
Quote from: kxxr on March 13, 2012, 04:53:57 PM
Bump, still hunting that SK made Craftsman 15/16" stubby.
Quote from: kxxr on November 21, 2011, 05:24:40 PM
It goes with this set, the part number is 44102 I believe. Made by SK, not sure when. The SK 15/16 would work too and it is number SKT88030.
(http://i301.photobucket.com/albums/nn48/kxxr/tools/craftsman4pc.jpg)

Not to get your hopes up to then let you down, but I'm certain I have one - alone with no mates - SOMEWHERE!  I'll go on a dig tomorrow if I can remember.
Title: Re: Craftsman Professional USA 15/16 stubby
Post by: kxxr on May 10, 2012, 10:09:25 PM
Well, my hopes are officially up!
Title: Re: Craftsman Professional USA 15/16 stubby
Post by: OilyRascal on May 14, 2012, 05:40:06 AM
You  let me forget about checking for you!  I set a reminder on my phone to check for you today.  If only I can remember to set an alarm to remember to report back :)
Title: Re: Craftsman Professional USA 15/16 stubby
Post by: OilyRascal on May 17, 2012, 04:07:39 PM
Sorry - It is an 11/16 :(
Title: Re: Craftsman Professional USA 15/16 stubby
Post by: kxxr on May 17, 2012, 05:14:42 PM
Crap! That's close. Thanks for checking!! Hang on to it, they're "RARE"
Title: Re: Craftsman Professional USA 15/16 stubby
Post by: OilyRascal on May 17, 2012, 05:33:15 PM
Quote from: kxxr on May 17, 2012, 05:14:42 PM
Crap! That's close. Thanks for checking!! Hang on to it, they're "RARE"

lol - Yes, I was/am!  YVW!
Title: Re: Craftsman Professional USA 15/16 stubby
Post by: kxxr on June 22, 2013, 08:50:32 AM
bump: I am still holding out for one of these if anyone has one or sees one, I would like to complete my set. Thanks!!
Title: Re: Craftsman Professional USA 15/16 stubby
Post by: eddie hudson on June 22, 2013, 04:35:21 PM
If it's any help, Craftsman #44102 Full Polish 15/16" Stubby Wrench is still available for $13.99 (I think) I have no idea if it's the design you're looking for but from the picture in the catalog it's stamped USA.
Title: Re: Craftsman Professional USA 15/16 stubby
Post by: kxxr on June 23, 2013, 08:52:30 AM
Thanks eddie. I'm after that one that was made for Craftsman for a short time by SK.
Title: Re: Craftsman Professional USA 15/16 stubby
Post by: eddie hudson on June 23, 2013, 03:01:17 PM
I just happened to go on the Craftsman website and the price is $1 cheaper. The picture in the Open Stock Catalog (2011) shows the nice smooth finish while the Online picture is a raised panel (I think it's a mistake) There's a guy at the Craftsman forum named Adam who is the ratchet rebuild king and knows just about everything Craftsman. (He works for Sears) Try asking over there and he'll probably tell you which makers are still floating around.
 
How about a picture of one out of the case.
 
 
Title: Re: Craftsman Professional USA 15/16 stubby
Post by: kxxr on June 27, 2013, 07:35:08 AM
Thanks for checking. The new ones look like this:
(http://i301.photobucket.com/albums/nn48/kxxr/tools/00944102000.jpg)
I'm after this one in 15/16". The number on the other side is 44102
(http://i301.photobucket.com/albums/nn48/kxxr/tools/inchstubbysk.jpg)
I think they can still be had with the SK stamping, but I'd sure like to find a Craftsman if I can.