Print Page - Sioux valve lathe

Title: Sioux valve lathe
Post by: ray on May 23, 2011, 03:57:15 PM

Thought you would enjoy this.
A Sioux valve refacing lathe
Too bad I don't have a valve to put in it.

Ray

Title: Re: Sioux valve lathe
Post by: Papaw on May 23, 2011, 06:50:31 PM

Go to a local auto shop, they should have some laying around.

Title: Re: Sioux valve lathe
Post by: rusty on May 23, 2011, 07:31:55 PM

Souix made some very nice tools.

After you turn the valves down, you will need one of these for the engine:

Title: Re: Sioux valve lathe
Post by: lzenglish on May 23, 2011, 08:44:24 PM

[quoteThought you would enjoy this.
A Sioux valve refacing lathe
Too bad I don't have a valve to put in it.
Ray[/quote]

NICE!
I have one of their old hand crank grinders. They have one of the coolest looking tradmarks in my opinion.

Wayne

Title: Re: Sioux valve lathe
Post by: bc_z on June 16, 2011, 05:24:06 PM

These are great old bench mounted tools. To complete this one you need the crank handle, pressure spring & possibly the cutter in the tool post (couldn't see the photo clearly enough). I have a co**ection of these that needs thinning.

bc_z

Title: Re: Sioux valve lathe
Post by: ray on June 16, 2011, 07:25:41 PM

Thanks bc_z, I'll have to dig to the bottom of the tool box to see if the crank handle is still there.

Ray

Title: Re: Sioux valve lathe
Post by: bc_z on June 16, 2011, 08:35:05 PM

ray,
this is what I was referencing, along with a unknown, baby brother? Anyone have/seen/identify the little guy?

(https://lh6.googleusercontent.com/-VWMdOO-S1AE/TfqqAyzYprI/AAAAAAAACfE/5jCZi7N5iOo/s400/P1010004.JPG)

(https://lh5.googleusercontent.com/-pU9NMFQiLQk/Tfqp5J5-ZWI/AAAAAAAACfM/mXL8hF-TWMk/s400/P1010003.JPG)

(https://lh3.googleusercontent.com/-kZAFFguhgW4/TfqqC__9eqI/AAAAAAAACfQ/myZarS4WjjY/s400/P1010006.JPG)

bc'z

Tool Talk

Classic Auto and Motorcycle Tools => Classic Auto and Motorcycle Tools => Topic started by: ray on May 23, 2011, 03:57:15 PM