Nice set of Allen (brand) Drivers, replaceable / removable shanks, hollow pass through handles. I don't know why the post photo is sideways, but if I click on it it rotates to correct orientation!
New ones for me. I haven't seen those before.
Dont remember seeing Allen brand, or anything close to these, do look like good quality stuff.
Hello yadda and John k. I had these 3 for a while , only one is an Allen brand, until I found the group from the flea. Also trying to complete the Allen brand T-handle set!
Two new sets to discover. Thanks for sharing!
Quote from: lptools on July 12, 2023, 05:30:41 PM
Hello yadda and John k. I had these 3 for a while , only one is an Allen brand, until I found the group from the flea. Also trying to complete the Allen brand T-handle set!
what size allen brand T's do you need?
Skip
Hello, Skip. I could not find any info on complete set of the T-Handles. Here is a list of what I do have. I would be interested in any that you have to fill in the blanks! Thanks, Lou
Beautiful se of Allen handle wrenches.
From the era of electro-mechanical repair I guess. Teletype, adding machines etc...
very commonly used just to remove knobs.
So.... I dug out my Allens, I have quite a few
but they are NOT stamped with a size
How to measure? across the flats?
also a couple that are similar but different brand
Bristol and Unbrako
the Unbrako one is broken
(https://live.staticflickr.com/65535/53043219302_ccf579a0c6_z.jpg) (https://flic.kr/p/2oPfn6Q)jull013 (https://flic.kr/p/2oPfn6Q) by Skip Albright (https://www.flickr.com/photos/skipskip/), on Flickr
(https://live.staticflickr.com/65535/53044192280_f30cc1fba1_z.jpg) (https://flic.kr/p/2oPkmkj)jull014 (https://flic.kr/p/2oPkmkj) by Skip Albright (https://www.flickr.com/photos/skipskip/), on Flickr
(https://live.staticflickr.com/65535/53043808071_1e29d893c6_z.jpg) (https://flic.kr/p/2oPio82)jull016 (https://flic.kr/p/2oPio82) by Skip Albright (https://www.flickr.com/photos/skipskip/), on Flickr
Hello, skip . Yes, across the flats, either in the broach, or on the shank. I use a digital micrometer that gives a fractional readout. If you have a way to measure accurately with a different type of micrometer, I can do the conversion. Are you going to Donnelly's? I will be set up there if you want to bring them along :grin:
Quote from: lptools on July 13, 2023, 07:32:19 PM
Hello, skip . Yes, across the flats, either in the broach, or on the shank. I use a digital micrometer that gives a fractional readout. If you have a way to measure accurately with a different type of micrometer, I can do the conversion. Are you going to Donnelly's? I will be set up there if you want to bring them along :grin:
just PM me your address, i'll take care of things
Thank you!!
still need your address lptools