Tool Talk

General Category => General Discussion => Heads Up => Topic started by: eddie hudson on December 04, 2011, 07:21:48 PM

Title: GIRDER-MINOR-9-ADJUSTABLE-WRENCH
Post by: eddie hudson on December 04, 2011, 07:21:48 PM

7 bids already

http://www.ebay.com/itm/UNUSUAL-ENGLAND-SMALL-OLD-VTG-GIRDER-MINOR-9-ADJUSTABLE-WRENCH-ANTIQUE-RARE-TOOL-/250946160598?pt=LH_DefaultDomain_0&hash=item3a6d8e87d6

Title: Re: GIRDER-MINOR-9-ADJUSTABLE-WRENCH
Post by: benjy on December 05, 2011, 11:34:30 AM

its actually a 90 not a 9,,there are a few sizes of these,,notably the No 91,,used in rolls royce toolkits amongst others.

Title: Re: GIRDER-MINOR-9-ADJUSTABLE-WRENCH
Post by: amertrac on December 05, 2011, 02:37:17 PM

I don't see any one here on it so i am bidding

Title: Re: GIRDER-MINOR-9-ADJUSTABLE-WRENCH
Post by: Papaw on December 05, 2011, 06:11:03 PM

You might have to dig deep to buy that one, Bob!

Title: Re: GIRDER-MINOR-9-ADJUSTABLE-WRENCH
Post by: walker on December 06, 2011, 03:13:33 AM

bobw,if you dont get the girder wrench let me know,i can
probably find you one.fairly common.
brian

Title: Re: GIRDER-MINOR-9-ADJUSTABLE-WRENCH
Post by: amertrac on December 06, 2011, 04:39:02 AM

I am still in BUT I don't know if I want to go higher.  bob w.
and thanks brian if you see any 4 or under you tell me   bob w.

Title: Re: GIRDER-MINOR-9-ADJUSTABLE-WRENCH
Post by: eddie hudson on December 07, 2011, 07:13:53 PM

1 day left

Title: Re: GIRDER-MINOR-9-ADJUSTABLE-WRENCH
Post by: amertrac on December 08, 2011, 07:15:43 AM

I am OFF this one     bon w.

Title: Re: GIRDER-MINOR-9-ADJUSTABLE-WRENCH
Post by: Papaw on December 08, 2011, 08:24:23 AM

Then I am on it, but at my top bid already.

Title: Re: GIRDER-MINOR-9-ADJUSTABLE-WRENCH
Post by: benjy on December 08, 2011, 11:47:21 AM

dont try too hard on it guys,,walker and i will have at least one or two in the spring,,cheap as chips.,,,almost a guarantee.
besides,,if you buy a 90 you will want the other sizes,,before you know it there will be tools everywhere........ OH too late innit :)

Title: Re: GIRDER-MINOR-9-ADJUSTABLE-WRENCH
Post by: amertrac on December 08, 2011, 12:38:04 PM

I will wait( thanks)  if there is any adj.  wrenche over 4 in that you need i may have it   bob w.

Title: Re: GIRDER-MINOR-9-ADJUSTABLE-WRENCH
Post by: Papaw on December 08, 2011, 03:32:30 PM

I was in, but didn't win.

Title: Re: GIRDER-MINOR-9-ADJUSTABLE-WRENCH
Post by: eddie hudson on December 09, 2011, 03:34:21 PM

Sold for $60.00, not bad for a "common" UK piece