Tool Talk

General Category => General Discussion => Topic started by: john k on February 26, 2012, 11:02:21 PM

Title: Tool giveaway for March 3rd. !
Post by: john k on February 26, 2012, 11:02:21 PM
This weeks giveaway got me into the shop, and digging down into piles, too old, too rusty,part of a set, and so on.  Am offering these fine vintage, and nearly all American made tools.  Unbranded pliers, very vintage, 8in. Crescent wrench works fine jaws tight,Crescent LE1618 COE mint!,  Barcalo Buffalo 7/16, and to make it international a COE 5/8x19/32-DIN 895 made in Germany.  Get your name in the hat!
Title: Re: Tool giveaway for March 3rd. !
Post by: Papaw on February 26, 2012, 11:36:02 PM
Nice group! Thanks for stepping in, John!

Put Papaw in the hat.
Title: Re: Tool giveaway for March 3rd. !
Post by: Branson on February 27, 2012, 06:41:37 AM
Sure enough.  Put me in.
Title: Re: Tool giveaway for March 3rd. !
Post by: keykeeper on February 27, 2012, 08:14:35 AM
I've haven't been in the last couple, so put me in on this one!

Also, a question: What does COE mean?
Title: Re: Tool giveaway for March 3rd. !
Post by: Papaw on February 27, 2012, 08:24:51 AM
Looks like Combination Open End.
Title: Re: Tool giveaway for March 3rd. !
Post by: bunger on February 28, 2012, 05:49:39 AM
Add me to the list please
Title: Re: Tool giveaway for March 3rd. !
Post by: john k on February 28, 2012, 10:28:28 AM
Good to see people signing up.  But going to sweeten the pot anyway.  I have just acquired a Vlcek DA wrench, and a Plomb pebble DBE,  winner of the drawing will get their choice of the two, added to the above.  John
Title: Re: Tool giveaway for March 3rd. !
Post by: 1930 on February 28, 2012, 04:08:04 PM
DA wrench, put me in please
Title: Re: Tool giveaway for March 3rd. !
Post by: Nolatoolguy on February 28, 2012, 04:33:01 PM
Ahh what they heck, count me in

Never had a Barcalo buffalo. Wouldnt mind adding one to my collection.

Title: Re: Tool giveaway for March 3rd. !
Post by: lauver on March 01, 2012, 12:17:44 PM
john k,

Toss my name in too.  Can't resist the chance for a Plomb Pebble DBE.
Title: Re: Tool giveaway for March 3rd. !
Post by: john k on March 01, 2012, 10:48:37 PM
Since I just can't mislead, I got to straighten out a couple of things here.  The Plomb wrench is combo Open end, 5/8x3/4 (3031), and is one of the few Plomb wrenches I have.  The DA wrench is not as I stated, a Vlcek, but is instead an Indestro 1829-5/8.  I know, can hear the razzing and shouts already, I got to start doing this when fully awake.  For my transgression am tossing one more wrench in, you get it if, whatever, it is a Vlcek, for real, a W2225-11/16 x 25/32 open end, yes, for sure an open end.   And its in very nice shape for a steel wrench, no chrome, ever.  You still have time to sign up, drawing in two days. 
Title: Re: Tool giveaway for March 3rd. !
Post by: RedVise on March 02, 2012, 07:47:10 AM
Woot !!   Sign me up please !

Brian L.
Title: Re: Tool giveaway for March 3rd. !
Post by: Steve-o on March 02, 2012, 09:38:08 AM
Throw me in please. :)
Title: Re: Tool giveaway for March 3rd. !
Post by: johnsironsanctuary on March 02, 2012, 07:09:26 PM
I'm just barely in!
Title: Re: Tool giveaway for March 3rd. !
Post by: john k on March 03, 2012, 07:02:35 AM
Doing the drawing tonight, am off to work now, all day shift.  My wifes siamese will do the selection via balls of paper on the floor.  The cat is so spacey if I find even one, that will be the winner.
Title: Re: Tool giveaway for March 3rd. !
Post by: Papaw on March 03, 2012, 09:03:32 AM
So it will be a CATscan, huh?
Title: Re: Tool giveaway for March 3rd. !
Post by: john k on March 03, 2012, 09:35:50 AM
No, a cat scan is when they sit on the arm of the chair and stare mysteriously into your face, cause they are pissed you are in their chair,  this will be a cat chase the paper balls event.
Title: Re: Tool giveaway for March 3rd. !
Post by: rusty on March 03, 2012, 09:51:06 AM

Ahh, but that only works when you don't want them to chase the balls.
When you want a cat to do something, it becomes catatonic....
Title: Re: Tool giveaway for March 3rd. !
Post by: john k on March 04, 2012, 08:31:00 AM
We have a winner, Nolatoolguy has won the Tool giveaway, the cat has decided!  As the winner, he has already been notified, and we at giveaway central are awaiting his response.  I apologize to all those that waited up last night, but was called away to a dinner, due to a death in the family.  Am preparing to carefully wrap the tools, as I don't want any more wear on them beyond what they have endured the last 45 years.   John in Nebraska!
Title: Re: Tool giveaway for March 3rd. !
Post by: OilyRascal on March 04, 2012, 08:47:58 AM
Congrats, Nolatoolguy not in Nola
Title: Re: Tool giveaway for March 3rd. !
Post by: Nolatoolguy on March 04, 2012, 11:20:04 AM
Wow, I am very happy now. Oh do I just love this forum so very much :)

Title: Re: Tool giveaway for March 3rd. !
Post by: Nolatoolguy on March 04, 2012, 11:21:22 AM
Congrats, Nolatoolguy not in Nola

Thanks

An yeh even I sorta find it funny the name nolatoolguy but not living in nola. I guess I just didnt change it. Even after the crash I didnt wana confuse people of who I was. And I couldnt think of a new name I liked so I just stuck with what I had.
Title: Re: Tool giveaway for March 3rd. !
Post by: john k on March 04, 2012, 11:26:43 AM
Nola, I will be shipping tomorrow if all goes well.   Hope you can squeeze a few more flat wrenches into the toolbox. 
Title: Re: Tool giveaway for March 3rd. !
Post by: OilyRascal on March 04, 2012, 02:11:05 PM
Congrats, Nolatoolguy not in Nola

Thanks

An yeh even I sorta find it funny the name nolatoolguy but not living in nola. I guess I just didnt change it. Even after the crash I didnt wana confuse people of who I was. And I couldnt think of a new name I liked so I just stuck with what I had.

I like it.  I lived in "nawlins" for a few years.  That's where I met and married my wife.  It resonates with me when I see the screen name. :)
Title: Re: Tool giveaway for March 3rd. !
Post by: Nolatoolguy on March 04, 2012, 02:26:24 PM
Congrats, Nolatoolguy not in Nola

Thanks

An yeh even I sorta find it funny the name nolatoolguy but not living in nola. I guess I just didnt change it. Even after the crash I didnt wana confuse people of who I was. And I couldnt think of a new name I liked so I just stuck with what I had.

I like it.  I lived in "nawlins" for a few years.  That's where I met and married my wife.  It resonates with me when I see the screen name. :)

Yeh I didnt actually live in the city. I lived in the hammond area.
Title: Re: Tool giveaway for March 3rd. !
Post by: Nolatoolguy on March 07, 2012, 06:17:05 PM
Today I recieved the tools. They are ausome.

Much better in person then on screen.

y'all should be jelous of me :)