Print Page - it is getting there

Title: it is getting there
Post by: john k on February 09, 2013, 11:28:00 PM

New Britain combo wrenches, still shy the 3/8 and one inch. Also have found the super thin (tappet) open end wrenches. Combo box end offsets slowly sifting in. Have most of the combo open ends too.

Title: Re: it is getting there
Post by: john k on February 10, 2013, 07:54:22 PM

The other pics that would not post the first time.

Title: Re: it is getting there
Post by: bunger on February 12, 2013, 06:38:37 PM

I have an orphan 1" combo, if you are interested

(http://i64.photobucket.com/albums/h188/mayo4/100_3475_zps8c133809.jpg)

Title: Re: it is getting there
Post by: john k on February 12, 2013, 06:58:19 PM

YES!!!!!

Title: Re: it is getting there
Post by: john k on February 16, 2013, 11:30:59 PM

Trying a different background, I think the camera was reading too much light bounce from the white. These wrenches actually look nicer up close and personal.

Title: Re: it is getting there
Post by: rusty on February 17, 2013, 08:48:19 AM

>Trying a different background

White paper is evil, green is good, also brown cardboard, tho it results in a boring backdrop ;P
Black seems just as evil...

Amazed you found Tappet wrenches in that pattern....

Tool Talk

Picture Forum => Picture Forum => Topic started by: john k on February 09, 2013, 11:28:00 PM