Tool Talk
Wrench Forum => Wrench Forum => Topic started by: leach on June 11, 2013, 08:51:06 PM
-
hello all i am going to the tanka verde swap meet this sat- night in tucson az. and you all been so nice to me in tool talk i want to show you all how nice I am let me know if there is a tool you need to finish a set you are working on and i will write it down and keep a eye out for you and believe me there is old tools at this swap meet i call it the rust meet lol i will take my eye loupe with me to see if i can find what you are looking for please dont ask for sets of 12 or like that but if a tool or 2 i will look thank you all, glad to be a member
LEACH
-
We are lucky to have such giving members, thanks for the offer. I am sure someone is looking for something.
Also check out the wanted board.
-
hello all i am going to the tanka verde swap meet this sat- night in tucson az. and you all been so nice to me in tool talk i want to show you all how nice I am let me know if there is a tool you need to finish a set you are working on and i will write it down and keep a eye out for you and believe me there is old tools at this swap meet i call it the rust meet lol i will take my eye loupe with me to see if i can find what you are looking for please dont ask for sets of 12 or like that but if a tool or 2 i will look thank you all, glad to be a member
LEACH
I will take any flat stamped steel wrenches you can find with numbers on them, you may find a #1, #2, #4, #5 Nothing else will be stamped into them other than the numbers. Usually the number is stamped direct center or so ( no particular direction ) and is on only one side. Thanks for the offer
-
MINATURES
ANY WORKING MODELS UNDER 2 1/2 INCHES OR .25 SCALE
-
Leach:
I am looking for a missing 3/8-inch socket that goes with this set. It will be a 12-point socket with a 1/2-inch hex opening in its bottom, and it will have its size, 3/8, and "Made in U.S. A." stamped on it. It will also have a ring of 1/4-inch grooves around the base, up 1/8-inch from the bottom edge. If you find one, please PM me .
-
Leach:
I am looking for a missing 3/8-inch socket that goes with this set. It will be a 12-point socket with a 1/2-inch hex opening in its bottom, and it will have its size, 3/8, and "Made in U.S. A." stamped on it. It will also have a ring of 1/4-inch grooves around the base, up 1/8-inch from the bottom edge. If you find one, please PM me .
ok i will look for it
-
hello all i am going to the tanka verde swap meet this sat- night in tucson az. and you all been so nice to me in tool talk i want to show you all how nice I am let me know if there is a tool you need to finish a set you are working on and i will write it down and keep a eye out for you and believe me there is old tools at this swap meet i call it the rust meet lol i will take my eye loupe with me to see if i can find what you are looking for please dont ask for sets of 12 or like that but if a tool or 2 i will look thank you all, glad to be a member
LEACH
I will take any flat stamped steel wrenches you can find with numbers on them, you may find a #1, #2, #4, #5 Nothing else will be stamped into them other than the numbers. Usually the number is stamped direct center or so ( no particular direction ) and is on only one side. Thanks for the offer
ok will keep a eye out
-
Thanks!!!