Tool Talk
What's-It Forum => What's-It Forum => Topic started by: Edkat3 on October 05, 2013, 10:58:44 AM
-
Any idea what this was made for. It's got a lot of age. There is a #3 stamped on the head and a "0" at the bottom of the head where the handle turns in. No makers markings. Total length about 18". Thanks.
-
Is the shank threaded whereas to come down on the working end - as if to "clamp"?
If so, and if it had a little more beef in appearance I'd want to guess a nut splitter.
-
The shaft is threaded so it can clamp on to various sizes but the end is machined flat. Looks like it was made to hold and not split.
-
It kind of looks like a pipe cutter with the wheel assembly missing.
Mike
-
It does have that pipe cutter shape but the inside top is hexed to hold a nut or bolt. No way it would spin around a pipe. There are no indications anywhere that something is missing. Tool is really solid.
-
It looks like some fire hydrant wrenches.
-
>It looks like some fire hydrant wrenches.
Yes, it is for something with an odd number of sides, likely 5, could be a universal water meter wrench (water meters used to have pentagon tamper proof nuts) , looks a bit flimsy for a hydrant.
-
It does have that pipe cutter shape but the inside top is hexed to hold a nut or bolt. No way it would spin around a pipe. There are no indications anywhere that something is missing. Tool is really solid.
Yes -- the "STANWOOD" pipe cutter did not have "antifriction rollers" and the frame otherwise matches. ( http://books.google.com/books?id=aClRAAAAYAAJ&pg=PA246&img=1&zoom=3&hl=en&sig=ACfU3U01T2RWW9mQgL70gPtX6Gwgjecrbw&ci=88%2C193%2C876%2C257&edge=0 ) The image is from a google digitized OIL WELL SUPPLY CO. catalog.
-
Interesting. Thanks for the information.
-
Managed to find two images of pipe cutters without rollers - amongst hundred with - guess they are early ones....
2nd image are by Mark MFG Co Chicago see: http://www.ebay.co.uk/itm/Vintage-Pipe-Cutter-No-2-Mark-MFG-Co-/190900388738?nma=true&si=BXDGElde4kHOeiX5BKgpzfDio1o%253D&orig_cvip=true&rt=nc&_trksid=p2047675.l2557
-
A search for Stanwood finds the 1859 patent, see http://www.datamp.org/patents/displayPatent.php?id=42096..
Note, the shape of the guide for the cutter head is almost identical with the one the one shown above...
-
Just to muddy the waters, there also was a pipe wrench patent using that frame style, although there's no record it ever was brought to market.
( http://www.datamp.org/patents/displayPatent.php?number=441145&typeCode=0 )
I still lean toward "Stanwood pipe cutter " minus the cutter head.
-
Note, the pipe wrench has serrated jaws, not smooth like the pipe cutter. Difficult to see in Edkat3's picture, but they look smooth to me....