News:

"You can use an eraser on the drafting table or a sledgehammer on the construction site." - Frank Lloyd Wright

Main Menu

Need some ideas on this.

Started by EVILDR235, December 14, 2016, 02:28:00 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

EVILDR235

So i have tools that i don't use all the time and want to protect them. I have taken a box of baby wipes and dried out the wipes. I would like to put some type of oil on them so i can wipe down tools before putting them away. I have lots of different types of oils and can't decide what oil to use. I thought maybe ATF since i have a paper can of it. I am thinking the tools i want to display i will use paste wax on them. Does anybody make oil type wipes for tools ? I know they do for firearms, but they are too expensive. I don't want to drown the wipes, just add a little oil now and then.

EvilDr235

p_toad

Any light weight oil should be ok on all steel tools, but i would be very careful about wood and plastic parts  (same way as watching out for celluloid plastic).   The baby wipes are probably good to give them a light coating/wipe, but don't leave that "oil rag" laying around...  It may not be a drying oil like for wood finishes, but why take a chance with something flammable?

Northwoods

Old English from Wallymart.  Works on metal, wood, and leather.
I bought an old frozen Stanley model 82 cabinet scraper this morning.  Completely covered with paint.
Used paint remover, soap and water, and Old English; the wingnut adjustment and the scraper clamp are loose and working like new.  I let it dry another day or two, and I'll treat the wood, perhaps with a little stain, and it will be sweet, better than it has been in 50 years.
The ORIGINAL Northwoods.

EVILDR235

I keep all rags and paper towels in a metal can with a lid. Later i burn them. I worked in a commercial auto repair shop for 32 years and never had anything burn. Seen one dummy drill a hole in a full gas tank. Seen another guy burn up four cars while using a torch. Another guy using a Pardner cut off saw caught all our dirty work clothes on fire. NO FIRE, that was always the rule after wear your safety glasses.

EvilDr235

Chillylulu

Don't put too many oily rags together, they can spontaneously combust.

I've always been too overly cautious about this.

Another good reason to keep them in a steel can.

Chilly