News:

"Do you not know that a man is not dead while his name is still spoken?" - Terry Pratchett, Going Postal

Main Menu

More of the old & the new

Started by lptools, December 02, 2018, 09:36:33 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

lptools

Hello, Progress continues on the garage reno!! Here are a couple photos of the old ceiling, and one of the new ceiling. I need to get all of the ceiling completed so that I can level the floor!!Regards, Lou
Member of PHARTS-  Perfect Handle Admiration, Restoration and Torturing Society

international3414

is that dropped,but not really dropped?....good choice on insulation,is it rock wool,.,or whatever they call it

lptools

Hello, You have a good eye!!! The wall angle is nailed to the bottom edge of the exposed ceiling joists, (storage loft above), and then tiles and cross tees across the wall angle. I went with R-19 fiberglass batts in the ceiling joists, and an R-15 , blown-in cellulose & fiberglass batts in the walls. Thanks, Lou
Member of PHARTS-  Perfect Handle Admiration, Restoration and Torturing Society

international3414


lptools

Member of PHARTS-  Perfect Handle Admiration, Restoration and Torturing Society

papadan

OK Lou, I just can't stand the suspense, What does finishing the ceiling have to do with leveling the floor? ;-()
VWs to D10s, I've fixed em.
Member of PHARTS-  Perfect Handle Admiration, Restoration and Torturing Society

lptools

All of the ceiling parts are stacked on the floor!!!! I don't like to move things twice, so as soon as the ceiling is installed, I have a clear shot at the floor!!!!!
Member of PHARTS-  Perfect Handle Admiration, Restoration and Torturing Society

gibsontool

That makes sense. Is the floor concrete?

lptools

Hello, Papadan. Yes it is concrete, cracked & heaved, also a good coat of lead based paint. I am borrowing a Surface Grinder with a HEPA vac for the safe removal of the paint, the new floor coating would not stick to the old paint. Tried doing it manually , (wet scraping), stuff just would not come off.Regards, Lou
Member of PHARTS-  Perfect Handle Admiration, Restoration and Torturing Society

papadan

OK makes since now! Good luck with that floor job.
VWs to D10s, I've fixed em.
Member of PHARTS-  Perfect Handle Admiration, Restoration and Torturing Society