my four inch or under club

[volvadi]

another one

Really like this one!  Do you know how old it is?  It looks to be from a later period than mine, but earlier than the ugly "made in Spain" by Irega wrenches like the one pictured below.



Did a little searching but can't find another like yours.

Must keep looking!!!!

[benjy]

Your Bahco looks unused.  Is it?

it appears unused to me,,although it is a bit of a cheat,,it  is marked as a 4 inch,,but is nearer 4 1/2 inches.

[john k]

I dug these out of my work box,   have some more but had work coming at me.  The crescent is stamped Crestoloy and painted Navy gray, the vise-grips is a 4w but is actually longer, Mossberg bicycle wrench was rusted solid when I found it, and the pipe wrench, (made in Germany).  Have a 2 inch crescent around someplace, probably on a key chain. 

[J.A.F.E.]

I dragged out some more plus the ones from the first pic.



Top to Bottom:
Sturtevant torque wrench 0-16 oz/in 1/4 drive
Snap on 105, Blue Point HL14, Diamond HL14 (I believe Diamond was the OEM for the Blue Point), Vlchek Fitz All, 2 1/2 adjustable, 3" bicycle A over G&J over Products inside diamond
Williams 1519, Champion deArment, Champion deArment, K-D No 7, K-D No 8, Snap on 5CP, Richards Bros & Sons Shefield England.

[amertrac]

Mr,J.A.F.E.    If the three adj. wrenches want to join my four and under club they are more than welcome the one rule is that they have to reside here   LOL   bob w.

[amertrac]

some older members of the club shortest 1 in longest 3 in

[Stoney]

Amertrac, here are my 4 and unders.

Top row left to right, 3 1/4" Brown & Sharp calipers, wood handle stubby phillips, wood handle stubby straight slot.  Second row, 4" K&E Paragon drop pen compass and 3 3/4" Ruleta pencil compass.  Third row 3 3/4" Peck,Stow & Wilcox Star bicycle wrench and 3" G&J bicycle combination wrench and screwdriver.  The rest are Lakeside and Billings & Spencer DOE setscrew wrenches , J.H.Williams single end setscrew wrench, 3-J.H. Williams and 1-Billings & Spencer single end machine wrench 1 Fairmont and 1 unmarked DOE and 1 small oiling can.  I also collect oilers and drafting tools

[kxxr]

You didn't say it had to be USA, and I think this one has been on at least one boat ride. A bad picture, but I can't find any markings other than the owner marks.

[Branson]

Hey kxxr, I have one of those!  3 7/8 long.  I'll have to dig around and see what else I can find 4 and under.

[Stoney]

These Snathes

and this small gater must have been out playing when I was shooting my 4 and unders.

[J.A.F.E.]

These are all 3" and under.

Armstrong, Bonney, Dunlop, Herbrand, Indestro, MAC, Proto and Williams although the wrenches are laid out in a different order.



Snap on left and center and Blue Points and Blue Point on the right.

[amertrac]

I never ibvited my ignition wrenches, looks like i need a bigger club house   bob w.

[Lewill2]

Some of mine

[fflintstone]

I have a 4" SK and 2" & 3" hong kong ones fit for a keychain.

[Lewill2]

My picture doesn't show any of my 4 inch crescent style wrenches but I only have about 9 of those.