« previous next »
Pages: [1]   Go Down

Author Topic: S-K Visegrip's  (Read 4367 times)

0 Members and 1 Guest are viewing this topic.

Offline mikeswrenches

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 2002
S-K Visegrip's
« on: March 13, 2015, 11:10:55 AM »
This is the first of these I've seen.  They are 7 in. long as pictured.  I looked on the net and the 'wonderful' auction site but didn't come up with anything.

Anybody else run across a pair?  Or know when they were made.

Mike
Logged
Check out my ETSY store at: OldeTymeTools

Offline lbgradwell

  • Hero Member
  • *****
  • Posts: 1491
  • Oakville, ON
Re: S-K Visegrip's
« Reply #1 on: March 13, 2015, 02:09:41 PM »
That's a first for me, Mike.

That pair must have been from 1969 to 1971 as that is a Dresser-era logo and still shows a Chicago address. In 1968, it was still SK-Wayne, and by some time in 1971, the address had changed to Franklin Park...
Logged

Kijiji King

Offline Ken W.

  • CONTRIBUTOR
  • Contributor
  • Hero Member
  • ***
  • Posts: 691
Re: S-K Visegrip's
« Reply #2 on: March 13, 2015, 04:46:32 PM »
I have a pair of S-K Vise grips in my garage somewhere.
Logged

Offline Lostmind

  • Hero Member
  • *****
  • Posts: 1567
  • Wellington, Ohio 44090
Re: S-K Visegrip's
« Reply #3 on: March 13, 2015, 06:35:51 PM »
first for me , thanks for the post
Logged
Of all the things I've lost , I miss my mind the most

Offline EVILDR235

  • Hero Member
  • *****
  • Posts: 1323
Re: S-K Visegrip's
« Reply #4 on: March 13, 2015, 07:19:52 PM »
I have Proto, P&C and Blackhawk marked Vise Grips. I may have others, but i remember those three for sure. I guess Peterson  Mfg. was more than happy to stamp others names on their tools. I only buy Peterson made V.G's. No Irwin made ones in my tool boxes. Two days ago i picked up a pair of Samson Lever Jaw Wrench pliers. kinda worn out, but i like the adjusting screw on them. Bullet shaped. I may put the adjusting screw on a pair of Vise Grips just to drive a future collector of Vise Grips crazy thinking he has found another version of them.

EvilDr235
« Last Edit: March 13, 2015, 07:41:26 PM by EVILDR235 »
Logged

Offline lbgradwell

  • Hero Member
  • *****
  • Posts: 1491
  • Oakville, ON
Re: S-K Visegrip's
« Reply #5 on: March 13, 2015, 07:42:16 PM »
Quote from: EVILDR235 on March 13, 2015, 07:19:52 PM
I only buy Peterson made V.G's. No Irwin made ones in my tool boxes.

+1 on that.

I've also seen Vise-Grips branded for Master Mechanic, Wilde & New Britain.
Logged

Kijiji King

Offline EVILDR235

  • Hero Member
  • *****
  • Posts: 1323
Re: S-K Visegrip's
« Reply #6 on: March 13, 2015, 07:58:30 PM »
Irwin, Made in the U.S.A. with Global junk are still junk.

Unknown.
Logged

Offline john k

  • Contributor
  • Hero Member
  • ***
  • Posts: 2657
Re: S-K Visegrip's
« Reply #7 on: March 13, 2015, 08:31:42 PM »
Vise Grips have a distinctive feature that makes them easy to spot in a pile.  The upper jaw is held in place by that deep crimp and one rivet.  I forget how many tons of pressure that crimp is put on with but it is high.   That is one of their patented features, look at the foreign made tools, and you will see no crimp and two or three rivets in that area.   I have a pair stamped New Britain too. 
Logged
Member of PHARTS - Perfect Handle Admiration, Restoration and Torturing Society

Offline mikeswrenches

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 2002
Re: S-K Visegrip's
« Reply #8 on: March 13, 2015, 08:48:45 PM »
Thanks for all the great information from everyone.

I must be living a sheltered life here in FL.  I've never seen any that had anything other than  Vise-grip marked on them.  Except for the Irwin stuff.

Mike
Logged
Check out my ETSY store at: OldeTymeTools

Offline EVILDR235

  • Hero Member
  • *****
  • Posts: 1323
Re: S-K Visegrip's
« Reply #9 on: March 13, 2015, 09:15:09 PM »
I have several pairs of Vise Grips that look like the upper jaw is also brazed or silver soldered on. Whatever it is, it was done at the factory not in Bubba's garage. If it were just rivited and crimped there would be a noticeable line between the two parts and i do not believe chrome would fill in and hide that gap. If they were brazed or silver soldered, that gap would be filled and the chrome would have full coverage where the two parts meet. As far as silver solder, i don't know if you can plate it.

EvilDr235
Logged

Offline Bill Houghton

  • Hero Member
  • *****
  • Posts: 2865
Re: S-K Visegrip's
« Reply #10 on: March 18, 2015, 02:05:54 PM »
Quote from: EVILDR235 on March 13, 2015, 07:19:52 PM
Two days ago i picked up a pair of Samson Lever Jaw Wrench pliers. kinda worn out, but i like the adjusting screw on them. Bullet shaped. I may put the adjusting screw on a pair of Vise Grips just to drive a future collector of Vise Grips crazy thinking he has found another version of them.

EvilDr235
Thus living up to your name.

I've never seen real Vise Grips stamped with any name except the original, either.  Interesting.
Logged

Offline EVILDR235

  • Hero Member
  • *****
  • Posts: 1323
Re: S-K Visegrip's
« Reply #11 on: March 19, 2015, 08:19:06 AM »
Sampson Lever Jaw pliers are just a knockoff of Vise Grips. I have seen many knockoff brands. Some good, some total junk.

EvilDr235
Logged

Offline Chillylulu

  • CONTRIBUTOR
  • Hero Member
  • *****
  • Posts: 1533
Re: S-K Visegrip's
« Reply #12 on: March 26, 2015, 03:48:57 AM »
I have a couple of s-k vice grips.  Only two s-k screwdrivers though.

Chilly
Logged
Pages: [1]   Go Up
« previous next »