Author Topic: Unusual Patent Hammer (Read 1884 times)

lptools · « **on:** March 16, 2015, 06:19:22 PM »

Hello, All. I pulled this out of the hammer bin, wondering if anyone else has seen one of these. Patented on one side of the head, looks like Lapeer Mich , and a company name on the other side. Brass faces look to be removable, steel? malleable iron? head. Width across head with inserts is approx. 4-3/4", brass faces are 1-3/16" dia. Thannks, Lou

Lewill2 · « **Reply #1 on:** March 16, 2015, 06:53:41 PM »

Interesting hammer I don't recall seeing that style before.

bill300d · « **Reply #2 on:** March 16, 2015, 07:22:46 PM »

Nor have I. How are those faces held in?

bill

turnnut · « **Reply #3 on:** March 16, 2015, 09:59:42 PM »

looks like friction fit and also looks like you would use a tapered drift to drive the face
out to change.

just my 2 cent opinion.

lptools · « **Reply #4 on:** March 17, 2015, 11:08:14 AM »

Hello, Turnnut. I took a closer look, and you are right, most likely friction fit from the head , and a drift would be used to remove the brass inserts. Thanks, Lou

Plyerman · « **Reply #5 on:** March 17, 2015, 04:39:21 PM »

Neat, never seen one of those before

News:

Author Topic: Unusual Patent Hammer (Read 1884 times)

lptools

Unusual Patent Hammer

Lewill2

Re: Unusual Patent Hammer

bill300d

Re: Unusual Patent Hammer

turnnut

Re: Unusual Patent Hammer

lptools

Re: Unusual Patent Hammer

Plyerman

Re: Unusual Patent Hammer