« previous next »
Pages: [1] 2   Go Down

Author Topic: Cannot figure this one out.  (Read 6686 times)

0 Members and 1 Guest are viewing this topic.

Offline coolford

  • Hero Member
  • *****
  • Posts: 870
  • Old as dirt
Cannot figure this one out.
« on: February 23, 2020, 03:40:08 PM »
Bought at an estate auction yesterday.  It is mostly bronze or brass, does not clean up much with Brasso.  It is 9 1/2 inches long and weights 1 3/4 pounds.  The wheel is magnetic as is as area where the bottom handle joins. It has a partial mark, first is LG24,  then a date 1886, then JDFLL & Sons. and lastly _EV____KETIA.  I checked DATEMP for all the 1896 patents, no match and I figured that as I think it is British.  The way I think it works is you open the two larger handles, put something in it and then close the handles and then rotate the wheel handle to ???  I hope you are not stumped as I am.
Logged

Offline skipskip

  • Contributor
  • Hero Member
  • *****
  • Posts: 1518
  • Glenmont NY USA
Re: Cannot figure this one out.
« Reply #1 on: February 23, 2020, 05:30:54 PM »
tubing cutter?
Logged
A place for everything and everything on the floor

Offline amecks

  • Hero Member
  • *****
  • Posts: 1737
Re: Cannot figure this one out.
« Reply #2 on: February 23, 2020, 06:57:39 PM »
Yeah, or for cutting wire insulation?
Logged
Al
Jordan, NY

Offline Lostmind

  • Hero Member
  • *****
  • Posts: 1567
  • Wellington, Ohio 44090
Re: Cannot figure this one out.
« Reply #3 on: February 23, 2020, 07:38:39 PM »
A really elaborate cigar cutter
Logged
Of all the things I've lost , I miss my mind the most

Offline Northwoods

  • Hero Member
  • *****
  • Posts: 1901
Re: Cannot figure this one out.
« Reply #4 on: February 23, 2020, 07:55:14 PM »
Quote from: Lostmind on February 23, 2020, 07:38:39 PM
A really elaborate cigar cutter
Heck, yeah.
Logged
The ORIGINAL Northwoods.

Offline bill300d

  • Hero Member
  • *****
  • Posts: 1208
Re: Cannot figure this one out.
« Reply #5 on: February 23, 2020, 07:56:44 PM »
Have no idea but that means it's probably a nut cracker.
Logged
A person who could really read human minds would be privileged to gaze on some correct imitations of chaos.

Offline gibsontool

  • Contributor
  • Hero Member
  • ***
  • Posts: 1471
Re: Cannot figure this one out.
« Reply #6 on: February 23, 2020, 08:48:25 PM »
I agree with Bill, gotta be a nutcracker.
Logged

Offline coolford

  • Hero Member
  • *****
  • Posts: 870
  • Old as dirt
Re: Cannot figure this one out.
« Reply #7 on: February 24, 2020, 06:37:44 AM »
You-all don't have all the information if you think the wheel is a cutter, It is not sharp, it is more like a grindstone and nearly 5/16" across the flat. It also rolls along on the flat surface of the lower handle.
Logged

Offline geneg

  • Hero Member
  • *****
  • Posts: 375
Re: Cannot figure this one out.
« Reply #8 on: February 24, 2020, 07:53:18 AM »
What is the working diameter of the large opening?  It could be a lock seam roller for small cans or bottles.  Place the lid on, grip it & then roll the wheel around it.  Think opposite of a can opener.
Logged

Offline mvwcnews

  • Hero Member
  • *****
  • Posts: 962
Re: Cannot figure this one out.
« Reply #9 on: February 24, 2020, 09:59:44 AM »
I'm trying to figure out the geometry of the thing.  The roller part is pulled 'away' from the gripping area of the "pincers" portion the way it looks to me.  As for DATAMP -- the only patents in there are ones entered by the data stewards.  Which is a very small segment of the millions of patents granted by the U.S., Canada, etc.
Logged

Offline coolford

  • Hero Member
  • *****
  • Posts: 870
  • Old as dirt
Re: Cannot figure this one out.
« Reply #10 on: February 24, 2020, 10:09:42 AM »
Once you bring the "something" together between the gripers you then roll it with the top lever.
Logged

Offline mvwcnews

  • Hero Member
  • *****
  • Posts: 962
Re: Cannot figure this one out.
« Reply #11 on: February 24, 2020, 11:33:18 AM »
So it takes two hands to operate the tool?  That means whatever it is working on is firmly attached, or being held in a vise or whatever.
Logged

Offline oldgoaly

  • Hero Member
  • *****
  • Posts: 1495
Re: Cannot figure this one out.
« Reply #12 on: February 24, 2020, 01:50:37 PM »
Combination saw set, nut cracker. thingamabob. and doomaajiggy!
Logged
A bunch of pics (5000+) of tools and projects in our shoppe
https://www.facebook.com/187845251266156/photos/?tab=albums

Offline leg17

  • Hero Member
  • *****
  • Posts: 641
Re: Cannot figure this one out.
« Reply #13 on: February 24, 2020, 01:51:43 PM »
If it's not a nutcracker, it must be a sawset.
Logged

Offline leg17

  • Hero Member
  • *****
  • Posts: 641
Re: Cannot figure this one out.
« Reply #14 on: February 24, 2020, 01:52:20 PM »
Quote from: oldgoaly on February 24, 2020, 01:50:37 PM
Combination saw set, nut cracker. thingamabob. and doomaajiggy!
OG you beat me while I was yet typing!
Logged
Pages: [1] 2   Go Up
« previous next »