News:

"Do you not know that a man is not dead while his name is still spoken?" - Terry Pratchett, Going Postal

Main Menu

plier type tool

Started by northkid, December 31, 2012, 08:45:42 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

northkid

Found this plier of sorts. 6.5" long. Only writing on it is PATD across top jaw. Serrated jaw slightly curved. Was it used to stretch carpet/upholstery? Any ideas what it was designed for?
Sir Northkid  of the Monkey Wrench Clan

rusty


Might help if we saw just a tiny bit more of it.....

Just a weathered light rust/WD40 mix patina.

northkid

Sorry, thot I had all the pics attached. Will try again.
Sir Northkid  of the Monkey Wrench Clan

Billman49

#3
I would go for upholstery webbing pliers - the webbing is gripped in the toothed jaw, and the bent section acts as a fulcrum, allowing the webbing to be tensioned with one hand whilst being tacked in place with the other...

Cobblers (shoemakers) use a similar version but with a much narrower jaw, often with a built in hammer head - the technique is similar, but once stretched over the last the leather is held in place by the hand, and then the pliers used as a hammer to tack it in place...

Branson

Upholstery webbing pliers is what it looks like to me as well.  As Billman pointed out, cobbler's lasting pliers have a similar function, and canvass stretching pliers serve the same purpose in stretching canvas over frames for paintings.

superzstuff

I think I have a pair of the pliers Billman49 is talking about. They are marked R. Timming & Sons England. I was wondering what they were for.
38 years a Tool and Die maker, forever a collector!

Branson

Yep, "lasting pliers."  Osborne still makes these, and they come up from time to time on eBay.  I've got three antique examples.