« previous next »
Pages: [1]   Go Down

Author Topic: How about a How's-it  (Read 4420 times)

0 Members and 1 Guest are viewing this topic.

Offline Lewill2

  • Hero Member
  • *****
  • Posts: 2007
  • Bucks County PA
How about a How's-it
« on: March 02, 2014, 07:37:55 AM »
Instead of a What's-it lets try a How's-it as in how has it been used other than the original designed use. I'm talking about how have you used adjustable wrenches other then as a wrench? One or two working together.
1. Hammer
2. Steel Band Cutters two working together
3. Increase leverage on a open end wrench by looping the handle hole into the jaws on the back end of the wrench
4. Sheet metal brake or straightener, bracket bender
5. Add turning power to square shafted screw drivers.

Logged

Offline international3414

  • Contributor
  • Hero Member
  • ***
  • Posts: 648
Re: How about a How's-it
« Reply #1 on: March 02, 2014, 07:43:02 AM »
as a shade-tree mechanic,i still practice #3.....bad,bad
Logged

Offline Papaw

  • Owner/Administrator
  • Moderator
  • Hero Member
  • *****
  • Posts: 11221
  • Alvin, Texas
    • Papawswrench
Re: How about a How's-it
« Reply #2 on: March 02, 2014, 09:20:50 AM »
Weld extension on each end and use to twist hot bar in ornamental ironworking.
Logged
Member of PHARTS - Perfect Handle Admiration, Restoration and Torturing Society
 
 Flickr page- https://www.flickr.com/photos/nhankamer/

Offline Nolatoolguy

  • Hero Member
  • *****
  • Posts: 2059
Re: How about a How's-it
« Reply #3 on: March 02, 2014, 02:33:21 PM »
In a safety video I had to watch there was a scenario where a guy wrapped a wrench handle in electrical tape for working on live electric. The guy didn't make it, keep in mind it was just a made up scenario. Then it talked about how insulated tools specifically designed for live electrical are different from other tools.
Logged
And I'm proud to be an American,
where at least I know I'm free.
And I won't forget the men who died,
who gave that right to me.
~Lee Greenwood

Offline Plyerman

  • CONTRIBUTOR
  • Hero Member
  • *****
  • Posts: 1650
  • Northern Michigan
Re: How about a How's-it
« Reply #4 on: March 02, 2014, 05:47:35 PM »
Ha, I was doing #5 just yesterday!
Logged
My friends call me Bob. My wife calls me a lot worse.

Offline wvtools

  • Contributor
  • Hero Member
  • ***
  • Posts: 983
Re: How about a How's-it
« Reply #5 on: March 02, 2014, 06:53:30 PM »
I have a friend who can use a claw hammer to open a beer bottle.  I have tried, but it hurts my knuckles.
Logged

Offline rusty

  • Hero Member
  • *****
  • Posts: 4345
Re: How about a How's-it
« Reply #6 on: March 02, 2014, 07:54:09 PM »
I keep a pair of large ones in the truck that I use most often for fixing bent hinges (from the wind, common on alumnium doors)

Now that I ponder on it, I don't think I have ever used either of them on a actual bolt..

I suppose this goes under Bracket Bending tho ;P

I have used one for a door stop tho....but then, I use whatever I am not using in the tool bucket for a door stop...even tho I have 3 or 4 in the truck, the truck is 40 feet away, the bucket is next to my foot....
Logged
Just a weathered light rust/WD40 mix patina.

Offline HeelSpur

  • Hero Member
  • *****
  • Posts: 2033
  • Contributor
Re: How about a How's-it
« Reply #7 on: March 03, 2014, 05:23:43 AM »
They work great for straightening out the ends on broken cast iron pipe.
There are times when a space is to tight to use cast iron cutters, so using
the end of an adjustable, about a 1/4", over the end of the pipe and nipping
off small amounts at a time. It doesn't come out perfect but it works.
Logged
RooK E

Offline humber2

  • Sr. Member
  • ****
  • Posts: 164
Re: How about a How's-it
« Reply #8 on: March 03, 2014, 02:38:54 PM »
Big screwdrivers are the best paint tin openers and can be used to stir the paint.
Logged

Offline oldtools

  • Hero Member
  • *****
  • Posts: 1424
  • Keep OldTools alive by giving them a purpose
Re: How about a How's-it
« Reply #9 on: March 03, 2014, 03:55:50 PM »
grab the nut with tip of one wrench & use other to rotate that wrench, useful when interference prevents grabbing nut on it's side.
(i.e. in a recess, etc..  when you don't have a socket or crowsfoot handy)
« Last Edit: March 03, 2014, 04:20:22 PM by oldtools »
Logged
Aloha!  the OldTool guy
Master Monkey Wrench Scaler

Offline international3414

  • Contributor
  • Hero Member
  • ***
  • Posts: 648
Re: How about a How's-it
« Reply #10 on: March 03, 2014, 04:12:17 PM »
Quote from: humber2 on March 03, 2014, 02:38:54 PM
Big screwdrivers are the best paint tin openers and can be used to stir the paint.
i thought i was the only one who did that...ha
Logged

Offline Bruce Hylton

  • Newbie
  • *
  • Posts: 3
Re: How about a How's-it
« Reply #11 on: March 03, 2014, 09:26:34 PM »
Attention getter to throw at some one who is not paying attention.
Logged

Offline mvwcnews

  • Hero Member
  • *****
  • Posts: 962
Re: How about a How's-it
« Reply #12 on: March 03, 2014, 09:37:14 PM »
Saw this at a wrench club meet a few years back -- use adjustable wrenches & lengths of dowels to make triangular display easels (for open books, etc.)

As for the "adjustable socket wrench for recessed nuts" -- that's why you always have at least 2 pairs of Vise-Grips handy.
Logged

Offline Chillylulu

  • CONTRIBUTOR
  • Hero Member
  • *****
  • Posts: 1533
Re: How about a How's-it
« Reply #13 on: March 06, 2014, 01:33:52 AM »
When hanging pipe under sloped roofs we would use two, with tge 3/8" threaded rod threaded through the hole end to bend the rod level.

Chilly
Logged
Pages: [1]   Go Up
« previous next »