« previous next »
Pages: [1]   Go Down

Author Topic: Cut poke pinch rivet tool  (Read 4709 times)

0 Members and 1 Guest are viewing this topic.

Offline superzstuff

  • Sr. Member
  • ****
  • Posts: 194
Cut poke pinch rivet tool
« on: October 13, 2012, 06:31:18 PM »
I can figure out what everything does, but to what is the question. No maker's mark or other markings, probably rusted off over time.
Logged
38 years a Tool and Die maker, forever a collector!

Offline Papaw

  • Owner/Administrator
  • Moderator
  • Hero Member
  • *****
  • Posts: 11221
  • Alvin, Texas
    • Papawswrench
Re: Cut poke pinch rivet tool
« Reply #1 on: October 13, 2012, 06:54:31 PM »
One of the many styles of multitool made.
Logged
Member of PHARTS - Perfect Handle Admiration, Restoration and Torturing Society
 
 Flickr page- https://www.flickr.com/photos/nhankamer/

Offline oldtools

  • Hero Member
  • *****
  • Posts: 1424
  • Keep OldTools alive by giving them a purpose
Re: Cut poke pinch rivet tool
« Reply #2 on: October 13, 2012, 08:25:35 PM »
Maybe leather working tool? "Cut, poke, pinch, rivet tool "
super cool tool!
Logged
Aloha!  the OldTool guy
Master Monkey Wrench Scaler

Offline rusty

  • Hero Member
  • *****
  • Posts: 4345
Re: Cut poke pinch rivet tool
« Reply #3 on: October 13, 2012, 09:36:26 PM »

Yeah...seems like it would be handy if you were making leather belts.....
Logged
Just a weathered light rust/WD40 mix patina.

Offline gtarmkr

  • Jr. Member
  • **
  • Posts: 17
Re: Cut poke pinch rivet tool
« Reply #4 on: October 16, 2012, 05:41:56 PM »
Could it be used to put Buttons into leather? Buttons that snap together.
Logged

Offline Brophy

  • Sr. Member
  • ****
  • Posts: 85
Re: Cut poke pinch rivet tool
« Reply #5 on: October 16, 2012, 06:18:42 PM »
It's certainly on the list of tools 'I don't want to fall down the stairs while carrying'.

Gotta give it a solid 8 on the niftyneato scale.

...Rob
Logged
Gray Tool Box WINNER!!!

Offline rusty

  • Hero Member
  • *****
  • Posts: 4345
Re: Cut poke pinch rivet tool
« Reply #6 on: October 16, 2012, 08:26:57 PM »

Also high on the list of tools you don't want some fellow tossing you across the shop....

Sort of like "which end of a snake is better to grab?"
Logged
Just a weathered light rust/WD40 mix patina.

Offline Billman49

  • Hero Member
  • *****
  • Posts: 790
  • Collector of edged tools, especially billhooks...
    • A Load of Old Billhooks
Re: Cut poke pinch rivet tool
« Reply #7 on: October 19, 2012, 04:35:11 PM »
Does it actually cut?? Difficult to see if it works like anvil pruners, or if the blade passes between the two outer parts - would it fold thin card or metal, rather than cut it??
Logged

Offline superzstuff

  • Sr. Member
  • ****
  • Posts: 194
Re: Cut poke pinch rivet tool
« Reply #8 on: October 19, 2012, 10:37:23 PM »
Blade cuts, is angled on one side and it passes through slot. Piece screwed to side is to keep blade from spreading when cutting.
Logged
38 years a Tool and Die maker, forever a collector!

Offline Plyerman

  • CONTRIBUTOR
  • Hero Member
  • *****
  • Posts: 1650
  • Northern Michigan
Re: Cut poke pinch rivet tool
« Reply #9 on: January 08, 2013, 09:35:39 PM »
C.A. Foster Combination Tool, patented April 19, 1870






Looks like a real beaut you got there superz
Logged
My friends call me Bob. My wife calls me a lot worse.

Offline keykeeper

  • Hero Member
  • *****
  • Posts: 1053
Re: Cut poke pinch rivet tool
« Reply #10 on: January 08, 2013, 10:03:01 PM »
That's just cool!!!

I must find one like it!!!
Logged
-Aaron C.

My vintage tool Want list:
Wards Master Quality 1/2" drive sockets (Need size 5/8), long extension, & speeder handle.
-Vlchek WB* series double box wrenches.
-Hinsdale double-box end round shank wrenches.

Offline 1930

  • Contributor
  • Hero Member
  • *****
  • Posts: 2141
Re: Cut poke pinch rivet tool
« Reply #11 on: January 09, 2013, 04:48:50 AM »
Quote from: keykeeper on January 08, 2013, 10:03:01 PM
That's just cool!!!

I must find one like it!!!

Find two
Logged
Always looking for what interests me, anything early Dodge Brothers/Graham Brothers trucks ( pre 1932 or so ) and slant six / Super six parts.

Offline superzstuff

  • Sr. Member
  • ****
  • Posts: 194
Re: Cut poke pinch rivet tool
« Reply #12 on: January 09, 2013, 07:56:58 AM »
Thanks for the research and documentation Plyerman!
Logged
38 years a Tool and Die maker, forever a collector!

Offline Branson

  • Hero Member
  • *****
  • Posts: 3643
Re: Cut poke pinch rivet tool
« Reply #13 on: January 09, 2013, 08:43:08 AM »
Logged

Offline Plyerman

  • CONTRIBUTOR
  • Hero Member
  • *****
  • Posts: 1650
  • Northern Michigan
Re: Cut poke pinch rivet tool
« Reply #14 on: January 11, 2013, 10:23:10 PM »
Quote from: superzstuff on January 09, 2013, 07:56:58 AM
Thanks for the research and documentation Plyerman!


No probs. Us cut poke pinch rivet tool guys got to stick together you know



Logged
My friends call me Bob. My wife calls me a lot worse.
Pages: [1]   Go Up
« previous next »