Author Topic: Walden box wrenches needed  (Read 2101 times)

0 Members and 1 Guest are viewing this topic.

Offline coolford

  • Hero Member
  • *****
  • Posts: 865
  • Old as dirt
Walden box wrenches needed
« on: June 09, 2021, 06:18:12 PM »
I am trying to put together two sets of Walden Worcester box wrenches .  These were made in the 1930's and at least until 1954 as they are in the 1954 catalog.  There are two sets of 10, 15 degree offset and 45 degree.  These have raised lettering, later wrenches with the same numbers have stamped in lettering.  The first picture is the 15 degree offset and in it I need the following:
#1430 7/16-1/2, #1432 9/16-5/8 and #1438 15/16-1.  In the second picture is the 45 degree offset and in it I need the following:
#1459 9/16-5/8, #1463 3/4-7/8 and 1464 13/16-7/8.  Note in the second picture #1457 7/16-1/2 is missing from the picture, but I have it.  I will purchase needed wrenches or trade as I have a lot of items I can trade.

Offline leg17

  • Hero Member
  • *****
  • Posts: 641
Re: Walden box wrenches needed
« Reply #1 on: June 09, 2021, 09:24:44 PM »
.....  Note in the second picture #1457 7/16-1/2 is missing from the picture, but I have it. ......

I tried on that one but you outbid me.
Good luck on the set.

Offline gibsontool

  • Contributor
  • Hero Member
  • ***
  • Posts: 1468
Re: Walden box wrenches needed
« Reply #2 on: June 19, 2021, 09:39:21 PM »
I have, what I thought, was a lot of Walden tools but after looking thru my drawer of duplicates I came up with none that you are looking for.

Offline anmuts

  • Newbie
  • *
  • Posts: 1
Re: Walden box wrenches needed
« Reply #3 on: May 08, 2022, 05:20:39 PM »
Hey! My dad recently came across the 1463 walden worcester wrench in a flea market. Tried researching it and found that you're looking for it, or at least were. Just wondering if you still are!

Offline coolford

  • Hero Member
  • *****
  • Posts: 865
  • Old as dirt
Re: Walden box wrenches needed
« Reply #4 on: May 08, 2022, 06:03:38 PM »
Yes, I still need a 1463 Walden 45 degree offset box wrench with the raised lettering.  There is a similar wrench with stamped in lettering with the same number however, and I do not need that one.  The 1463 sizes are 3/4"and 7/8".  Thus, if you have the raised lettering wrench give me a price and an address.

Offline gibsontool

  • Contributor
  • Hero Member
  • ***
  • Posts: 1468
Re: Walden box wrenches needed
« Reply #5 on: May 08, 2022, 06:15:51 PM »
I may have come across 1 that your looking for, It's the 13/16 x 7/8 in the 45% style but it does not have the 1464 number on it. I have around 20 or so double box end Barcalos but none have the part numbers on them. Do yours have the numbers on them or did you get the numbers from a catalog ? I can send you some pictures if you like but I have to wait for some assistance as I've been having trouble with posting pics and I can't figure out what I'm doing wrong